You are here

Simplified PSoC schematic? | Cypress Semiconductor

Simplified PSoC schematic?

Summary: 1 Reply, Latest post by danaaknight on 01 Aug 2012 11:15 AM PDT
Verified Answers: 0
Last post
Log in to post new comments.
Rocketmagnet's picture
131 posts



One thing I'm finding frustrating about using the PSoC 3s is that they seem to require a huge number number of capacitors and complex power connections.  For very space constrained applications, these can make things difficult. The QFN48 package apparently needs 9 capacitors, 10 power and 7 GND connections !


My question are: Is every power connection really necessary?  Is every capacitor really necessary?


For example, do I need the capacitor on Vddio3 if I am only going to be using the pins in that quadrant as analog inputs?  In fact, do I even need the power connection there? Could I just use one capacitor for all of the Vddio pins?


On the attached image, you can see my space constrained PCB, and part of the schematic for it. On the schematic, I have removed the capacitors from two of the Vddio0 pins (13 & 24) to try to give me some space. 




user_14586677's picture
7646 posts

The short answer is there is no good answer.


That being said look here at discussion of reasons for multiple power domains.


Its a bit art, not science.If your ports lightly loaded, current and C, you may be able to get

away with sharing a coupling cap across several Vddios. If you are doing high precision

analog and driving lots of C and I, probably not.


Not all coupling caps are equal, look at their specs, especially z vs f. MLC and Polymer tanatalum

the best.


Good luck.


Regards, Dana.



Log in to post new comments.