Pin assigmnent | Cypress Semiconductor
Hi Every one
I have been working for long time with PSOC3PIM1 from Ansync, Inc.
I am using the las version of Psoc Creator 3.3 SP1.
Always have been used the port 12 pins.
I have attached the schematic of such board.
On Pin Tab from Cydwr , Psoc Creator do not let me use the pins from port 12, nevertheless it show me like available
port 15 pins which are not available on the PSOC3PIM1 board .
I have upload a trivial project where you can see what I am talking about
Thank you very much for any help.