Connection between the chip and the KIT | Cypress Semiconductor
Connection between the chip and the KIT
I got problems on connecting with the chips and the KIT.
The chip that I use is "CY8C3866AXI-040",and the KIT is "MiniProg3".
I did not buy the develop board ,so I created it by myself.
The problem is while I using the PSoC Programmer to program the chip,and it shows "Can not acquire SWD device!".
I think I do wrong in the pins connection.
These are the pins I connect according to the datasheet.
Should I add capacitances or resistances to make the circuit correct?
I have been trapped for a long time.
Thanks a lot