Error while building projects in PSOC Designer “No rule to make project" | Cypress Semiconductor
Error while building projects in PSOC Designer “No rule to make project"
Try the following workaround:-
1) Go to Registry editor, by typing "Regedit" in run menu.
2) Go to registry entry "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem"
3) Select the NtfsDisable8dot3NameCreation entry.
4) If it is not zero, then assign zero (0) value to this registry entry, as shown in fig 1.
5) Restart you machine.
Now, you should be able to compile projects without error