PRoC SWD | Cypress Semiconductor
I am working on a project where I'd like to be using a Smart BLE module.
The company for whom I am doing this project has an earlier revision that is pretty much ready for a small manufacturing run. The earlier revision uses Nordic's NRF51 and for conformity I'd like to swap it for a Cypress module.
As this is being done hastily I want to make sure that I would be able to modify the firmware after productions. So I'd like to verify that the module can be flashed over SWD (ie with the Segger J-link) using a HEX or BIN file. To do this I would need 5 connections for SWDIO, SWCLK, XRES, VCC and GND? (I assume SWO is not used).
I's also like to know how I can generate a HEX file using PSoC creator?