You are here

How to program Hex file to PROC? | Cypress Semiconductor

How to program Hex file to PROC?

Summary: 5 Replies, Latest post by sagard_1819731 on 20 Dec 2016 01:53 AM PST
Verified Answers: 0
Last post
Log in to post new comments.
typoon's picture
User
11 posts

Hi, my device is the PROC: CYBL10573-56LQXI. I want to use the programmer to program the hex file directly. However I could not find the device family in the programmer interface. How can I program the hex file?

 

Thank you.

datahost_1720726's picture
User
2 posts

I can find CYBL10573-56LQXI in CY8C4xxx-BLE family.

Attachments: 
yssu's picture
Cypress Employee
46 posts

Hi! As already stated, you should be able to find the device in the programmer. Can you make sure you have the latest version of PSoC Programmer. If not, you can download it from here:

http://www.cypress.com/documentation/software-and-drivers/psoc-programme...

typoon's picture
User
11 posts

I have installed the latest version, it is 3.25.0.2504. Please see the attached pictures which I captured the device family, I could not find the  CY8C4xxx-BLE. Any other idea?

 

yssu's picture
Cypress Employee
46 posts

Were you using any other Cypress products prior to using CYBL10573-56LQXI? Connect CYBL10573-56LQXI, load file and click program. You will receive an error "hex file does not match device" but your device list should be flooded with new devices.

sagard_1819731's picture
User
12 posts

Hi typoon,

Did you connected external 3.3v power supply when programming,

because for me at start it wasn't detecting but after power suppy it detected automatically,

am attaching my programmer window,

you can checked configuration i have used and then see if you found out anything,

Thanks,

sagar

 

Log in to post new comments.