Bootloader | Cypress Semiconductor
Has anyone had any issues with the Cypress CYBLE-022001 Bootloader?
A Bootloader and Bootloadable project have been created and compiled and the .hex file of the Bootloadable programmed into the device.
After reset, the device does indeed wait for the WAIT_FOR_COMMAND_TIME till the application starts.
However, when attempting to program the device using Tools/Bootloader Host or the bootloader_host.exe directly using the .cyacd file, the device does not send the correct response to the Enter Bootloader command (i.e. 0x38) and immediately starts the Bootloadable application instead.
The same issue occurs when utilizing the Cypress source code to perform the Bootload process, also employing the .cyacd file.