Quadcopter using PSoC5 | Cypress Semiconductor
Quadcopter using PSoC5
This is my final BSc project. I made three boards: SBC (Single Board Computer) based on the PSoC5, IMU (Inertial Measurement Unit) and GPS. They are connecting one on the other and this whole platform sits on a charbon quadcopter frame. The communication is based on Bluetooth and Wi-Fi. The PID software is still on development. The PSoC5 is very good solution for everything and once you get used it you just can't use other solutions. The big advantage of this SOC is the Creator software that allows you to implement complicated systems in just minutes.