PSoC 5 evaluation - Cypress.com Forums http://www.cypress.com/? Re: PSoC 5 evaluation http://www.cypress.com/?rID=67294 Have you met this condition when using BarGraph calls -

 

LCD_Char_DrawHorizontalBG()

     Draws a horizontal bar graph.Only available when a bargraph character set has been selected.

 

Regards, Dana.

]]>
Sat, 04 Aug 2012 15:59:00 -0600
Re: PSoC 5 evaluation http://www.cypress.com/?rID=67290 i think its not the cable problem... something directly related with the code.

if i write "LCD_PrintString("hello world psoc");" no problem .

but if i add "LCD_DrawHorizontalBG(1, 0, 16,37);" the error occours...

 

 

/* ========================================
 *
 * Copyright YOUR COMPANY, THE YEAR
 * All Rights Reserved
 * UNPUBLISHED, LICENSED SOFTWARE.
 *
 * CONFIDENTIAL AND PROPRIETARY INFORMATION
 * WHICH IS THE PROPERTY OF your company.
 *
 * ========================================
*/
#include <device.h>

void main()
{
    /* Place your initialization/startup code here (e.g. MyInst_Start()) */

    /* CyGlobalIntEnable; */ /* Uncomment this line to enable global interrupts. */
   
    LCD_Start();
    LCD_Position(0,0);//no problem
    LCD_PrintString("hello world psoc");//no problem
    LCD_DrawHorizontalBG(1, 0, 16,37);//if the line added problem creates
    for(;;)
    {
        //LCD_Char_DrawHorizontalBG(1,1,16,25);
       
    }
}

/* [] END OF FILE */
 

]]>
Sat, 04 Aug 2012 14:43:45 -0600
Re: PSoC 5 evaluation http://www.cypress.com/?rID=63256 Hello,

Was there ever a resolution on this issue? I am now having the same problem with First Touch for PSoC 5. I have tried different cables, repairing the programmer, and reducing the clock speed. I have tried the usual reboot etc... I even tried on a second out of the box kit now to no avail. Any help would be highly appreciated.

 

Cheers,


Wess

]]>
Fri, 18 May 2012 22:01:24 -0600
Re: PSoC 5 evaluation http://www.cypress.com/?rID=57715 Reggler, could you try updating the software and replacing the cable, as t.schmid has suggested .

]]>
Thu, 29 Dec 2011 23:02:50 -0600
Re: PSoC 5 evaluation http://www.cypress.com/?rID=57670 I had the same problem today. I am using the same KIT (050)

I tried another cable and also repaired the Programmer Software (could be done using the Update-Tool and click on Configure).

Afterwards it seems to work..

]]>
Thu, 29 Dec 2011 10:14:19 -0600
Re: PSoC 5 evaluation http://www.cypress.com/?rID=57629  Well, I've tried all kinda frequencies. Swapping between JTAG and SWD seems to help but it's still annoying.Using 0.2MHz at the moment and the board I'm using is CY8CKIT-050.

 

Thanks for the help!

]]>
Wed, 28 Dec 2011 11:00:33 -0600
Re: PSoC 5 evaluation http://www.cypress.com/?rID=57611 For very high frequencies like 8Mhz replacing the length of the cable migh actually be an issue. The lower limit on the clock speed is certainly less than 0.8Mhz. Nevertheless, changing the cable is still worth a try. Which PSoC5 eveluation board are you using?

]]>
Tue, 27 Dec 2011 23:49:29 -0600
Re: PSoC 5 evaluation http://www.cypress.com/?rID=57607 the last time I saw and solved this error,was by replacing the MiniUSB cable.Try that.......

Hope this helps :-)

]]>
Tue, 27 Dec 2011 18:59:44 -0600
Re: PSoC 5 evaluation http://www.cypress.com/?rID=57596 I would suggest you to file a case; tell them which developement kit.I'm sure, they'll help you out.

Bob 

]]>
Tue, 27 Dec 2011 14:10:55 -0600