reconfiguration in PSoC - Cypress.com Forums http://www.cypress.com/? Re: reconfiguration in PSoC http://www.cypress.com/?rID=54293 Hello,

First of all, thank you for answering. Now, I'm going to explain what I want to do.

My objective is to write into the board a program that allows you to choose between all the possible configuration of an ADC, finally to take some comparatives. As doing it trough code is not possible because the ADC libraries don't have (or I don't see them) the C++ functions to access to all the ADC parameters, I had thought the possibility of writing "several projects" or layouts and then to switch between them, of course, regardless the PSoC Creator.

So, only two questions, when you say that in PSoC1 we can swich between configurations, are you talking about swiching between projects (or something like "layouts of hardware" with their corresponding configuration) previously loaded into the board?

And what do you mean when you say doing it manually for PSoC3/5?

Regards!

]]>
Thu, 15 Sep 2011 08:57:14 -0600
Re: reconfiguration in PSoC5/Creator http://www.cypress.com/?rID=54223 Dynamic Reconfiguration is not supported the same way as in PSoC1,

with the capability in the IDE to define and switch between configurations.

PSoC3/5 is much more complex, and tracking all the interactions of tryin reconfigure while "live"

could prove to be a challange.  Of course, the configuration of the PSoC3/5 devices are similarly

by writing internal registers, and so the same basic capability exists.

But, as I mentioned, no design tools exist for supporting this at the moment.

So it will be a manual process if you try to go down that road...

 

regards,

Tom Moxon

www.moxon.com

www.westmarkco.com

 

]]>
Tue, 13 Sep 2011 19:02:18 -0600