Select Debug Target empty - Cypress.com Forums http://www.cypress.com/? Re: Select Debug Target empty http://www.cypress.com/?rID=52264 Timothee,

I saw a similar problem during one of our developer conferences.  We had to uninstall and reinstall PSoC Programmer.  

Regards,
Matt 

]]>
Fri, 17 Jun 2011 16:27:30 -0600
Re: Select Debug Target empty http://www.cypress.com/?rID=52257 I assume you are using PSoC Creator 1.0 or later. We recommend you to upgrade you to the latest version of PSoC Creator that is available here, http://www.cypress.com/?rID=39551.

  • In the latest version of PSoC Creator, when you click the program button, if the device selected in the project( using the device selector catalog the program) matches with the target device to which Miniprog3 is connected programming continues smoothly.
  • If the programming does not start, the target device is not acquired and a window will appear similar to what is shown in the picture attached(prog1.jpg). 
  • Now Click on Apply Settings and the device connected will appear, http://www.dropmocks.com/mWfHV
  • Now click Port Acquire, http://dropmocks.com/mWd_o . Click connect and then say OK, the device should program successfully.
  • If the device does not appear in the list when Apply Settings is clicked, a possible reason could be due to the device may not being powered.

 

]]>
Fri, 17 Jun 2011 10:49:56 -0600