Miniprog 3 USB connection issue - CY8CKIT-001 - Cypress.com Forums http://www.cypress.com/? Re: Miniprog 3 USB connection issue - CY8CKIT-001 http://www.cypress.com/?rID=50941 PC Pete. Good that you got the connector issue resolved. Please be assured that any standard MiniB connector will fit in to the Miniprog3 receptacle.

]]>
Tue, 03 May 2011 04:12:23 -0600
Re: Miniprog 3 USB connection issue - CY8CKIT-001 http://www.cypress.com/?rID=50837 Ohwha

tafoo

liam.

 

Sorry everyone. It just occurred to me to check the specs of the various USB OTG connectors, and this is listed (of course) as a Mini-B connector. So I tried it and whaddaya know - it fits!

 

I think I'll just crawl away to a very dark, quiet corner and STFU. My sincere apologies for wasting everyone's time.

 

And I'm really having fun with the Designer and Creator software...

-PCPete

 

]]>
Sat, 30 Apr 2011 01:09:07 -0600
Re: Miniprog 3 USB connection issue - CY8CKIT-001 http://www.cypress.com/?rID=50806  ...And just so there's no possibility of confusion... :)

 

Hopefully this makes sense to someone... do I hear an "AHA!" anyone?

]]>
Thu, 28 Apr 2011 20:30:36 -0600
Re: Miniprog 3 USB connection issue - CY8CKIT-001 http://www.cypress.com/?rID=50805 Here's a shot of the Miniprog-3 connector (left), the standard type A connector (middle) and the MiniB connector (right).

As you can see, the Miniprog's connector is totally different to the MiniB type.

 

And just for completeness' sake, here's a closeup of the mini connectors together...

My apologies for the poor shots, I don't have access to all my holders and clips at the moment!

 

If anyone can identify the connector on the end of the Miniprog3, that will be a start, I'm sure if I can find an appropriate cable I'll be in business. I'm more than competent to make up a cable too if that's needed. But I'd prefer it to come in the kit!

 

I hope this helps clarify the issue. If you need better/more shots, please let me know and I'll do my best.

 

Cheers,

Pete

]]>
Thu, 28 Apr 2011 20:20:24 -0600
Re: Miniprog 3 USB connection issue - CY8CKIT-001 http://www.cypress.com/?rID=50795 Yes, The connector in Miniprog3 and on the development both are the same as far i know. A standard USB mini-b should do the job for you. Please provide us a screenshot of the receptacle on your miniprog3 so that we can see what type of connector it is. There might have been some mismanagement that might have led to wrong cable being a part of your kit.

Did you try inserting the USB mini b side of the cable in to the receptacle. It will be good if we get a screeshot of both.

]]>
Thu, 28 Apr 2011 11:36:15 -0600
Re: Miniprog 3 USB connection issue - CY8CKIT-001 http://www.cypress.com/?rID=50786  Thanks for the quick reply, I appreciate it!

 

So what you're saying is that the Miniprog3's USB connector should be the same (i.e.  "Mini-B" style) as the devboard's USB connector?

 

That's not the case with this Miniprog 3 - the Mini-B connector won't even fit into the receptacle. The receptacle on the end of the MP3 (opposite the 5-pin 0.1" ICSP-style connector for the CYC28 module and the 0.05" pitch IDC-style connector for JTAG debugging) has 5 pins in the centre of the receptacle with nothing around them. The standard Mini-B connection has 5 connectors, but they're 'fingers' that contact 5 strips inside the Mini-B receptacle.

This is not only a different pin polarity (i.e. male instead of female), it's a completely different shape to the mini-B. I've never seen one like this before, and I've developed and built USB devices with Mini and Micro A, B, and AB connectors!

 

I'm now assuming this requires some type of Miniprog3 to USB MiniB adapter, or else it's missing out of the kit.

 

Please note, I'm an ex-hardware and software designer, so I know the difference between the various connector styles, pitches, and pinouts; that's why I'm so sure I must be missing something really simple.

 

If no-one can help, I'll upload a photo of the offending bit...

]]>
Thu, 28 Apr 2011 04:09:11 -0600
Re: Miniprog 3 USB connection issue - CY8CKIT-001 http://www.cypress.com/?rID=50781 PCPete, the CY8CKIT-001 comes with a USB A-type to Mini USB cable. This cable can be used to connect MiniProg3 to the USB port on your computer for programming and debugging. The Mini USB connector goes in to Miniprog3 and the USB A-typr terminal goes in to your computer. The kit also comes with a 10 pin ribbon cable, this cable is used to connect the MiniProg3 to PSoC3/PSoC5 processor module for programming. The same is shown on page 24 of the Kit USER GUIDE that accompanies the kit, which is also available here, http://www.cypress.com/?docID=26945. 


The cable is common cable that is available these days in most of the electronics store, I am sure Dick Smith has it ! 

]]>
Thu, 28 Apr 2011 00:01:15 -0600