The ICE-Cube also serves as a single-site device programmer via an ISSP (In-System Serial Programming) Cable and MiniEval board included in the kit. The MiniEval board is a programming and evaluation board which connects to the ICE-Cube via an ISSP Cable and allows programming of DIP devices. There are also other Programming boards available for programming other packages. The MiniEval also includes LEDs and a POT for simple evaluation and demonstration.

PSoC 1 Debugger Includes:

• PSoC Designer Software CD-ROM
• ICE-Cube In-Circuit Emulator
• ICE Flex-Pod for CY8C29xxx Family
• Backward compatibility Cat-5 Adapter
• ISSP Cable
• Mini-Eval Programming Board in One
• USB 2.0 Cable and Blue Cat-5 Cable
• 110 ~ 240V Power Supply, Euro-Plug Adapter
• 2 CY8C29466-24PXI 28-PDIP Chip Samples

Supports following 8 bit PSoC1 (Programmable System-On Chip) families, including automotive, except CY8C25/26xxx devices.

PSoC 1 Getting Started Debugging - Part 1

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Related Resources:

The CY3210-ProtoMod kit is designed to work with the CY3210-ExpressDK.

Includes two Proto Modules and printed documentation. Requires CY3210-ExpressDK. CY3210-ProtoMod and CY3210-ExpressDK are available in the Cypress Online Store.

Hardware Description

This module kit supports the CY3210-ExpressDK.

The CY3217 is the base Miniprog1 kit. This kit will provide the user with a programming tool that can be used to program all PSoC1 devices, except the CY25/26xxx devices. The kit includes a Miniprog1 and USB cable. The Miniprog1 is included with many of the evaluation kits, but the CY3217 is the stand-alone Miniprog1 kit to be used across all Cypress PSoC kits.

Hardware Description

Supports all PSoC Mixed-Signal Array families, included automotive devices, but excluding the CY8C25/26xxx devices.

Kit Includes:

• Miniprog1 Programmer
• USB Cable

www.cypress.com/go/programming

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

This kit is designed for use with the CY8CKIT-001 PSoC Development Kit (sold separately), CY8CKIT-030 PSoC 3 Development Kit (sold separately) and CY8CKIT-050 PSoC 5 Development Kit (sold separately). The new PSoC® 3 and PSoC 5 architectures enable CapSense on all devices and the CapSense signals can be routed to any of the GPIO pins (up to 62). Due to the vast amount of programmable analog and digital resources available in these devices, as well as the higher performance CPUs and larger memory sizes, PSoC® 3 and PSoC 5 make great single chip solutions. Typically these applications have a microcontroller doing various functions and a separate CapSense solution. PSoC® 3 and PSoC 5 enable integration of these two devices into a single chip solution. What's more, PSoC® 3 and PSoC 5 CapSense leverages the revolutionary SmartSense™ auto tuning solution. Cypress's SmartSense solution is the industry's first and only true self-tuning system. This patent-pending solution optimizes parameters automatically during the design process, significantly reducing development time, while providing the most robust and quality CapSense solution on the market.

Kit Contents

The CY8CKIT-031 PSoC CapSense Expansion Board Kit includes:

• CY8CKIT-031 PSoC CapSense Expansion Board
• CY3280-BMM Universal CapSense Matrix Button Module Kit
• CY3280-SLM Universal CapSense Linear Slider Module Kit
• Two 1.5 mm overlay and one 3 mm overlay
• Quick Start Guide
• Resource CD

For PSoC training, please visit http://www.cypress.com/go/training.

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Please visit the Getting Started with PSoC 1 page which will guide you through your first steps. It provides basic information about software, technical documentation, training and support infrastructure.

Kit Contents

• CY3280-22x45 Universal CapSense Controller Board
• CY3280-22x45 Universal CapSense Controller Board CD
• Quick Start Guide
• CY3240-I2USB Bridge
• CY3210 MiniProg1 Programmer
• USB Cable
   

CY8C22x45 device series provides a low-cost platform solution for the applications where analog and digital integration is required along with a reliable touch-sensing. Some of the typical applications are as following:

• Home appliances
• Learning kits
• Automation
• Liquid level sensing
• Dispenser machines
• Medical instruments

Notes:

If external OSC used, please power the power with external supply not MiniProg1 or I2CUSB Bridge.

Click here to view the CapSense Plus demo video [English version]

Click here to view the CapSense Plus demo video [Chinese version]


Click here to view the LCD & CapSense demo video

 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

 

Cypress’s TrueTouch® Manufacturing Test Kit enables customers and touchscreen manufacturing partners to test touch panels with Cypress TrueTouch® controllers. The tests performed by this kit are production quality and demonstrate the built-in manufacturing test capabilities of Cypress TrueTouch® controllers. This kit can be used for early touch panel development and prototype testing, as a final production test solution, or as an example/demonstration of how to implement a custom production test solution.

CY3295-MTK Contents:

• TrueTouch® Bridge USB-to-I2C/SPI communications adapter
• Touchscreen Test Executive manufacturing test software (requires a PC with Windows® XP or Windows® 7 operating system)
• Manufacturing test supporting documentation
• TrueTouch® Bridge hardware design files

To order this kit, send a request to truetouch@cypress.com

The CY3207ISSP PSoC In-System Serial Programmer programs PSoC ICs with HEX files created with Cypress' PSoC Designer software.

The ISSP programs a single PSoC IC in one of three ways:

1. mounted on your PCB.
2. inserted into the ISSP socket.
3. via a test fixture.

The ISSP connects to your PC via USB and connects to your PCB with a 5-wire cable. Programming software includes Windows« GUI and command line capability. ISSP kit contains programmer, software, power supply, 5-wire programming cable, and USB cable.

 

Software Title	Description	Link
CY3207ISSP	Latest CY3207ISSP software

 

CY3218-CAPEXP2 Kit Contents:

• CY3218-CAPEXP2 CapSense Express Evaluation Board
• CY3240-I2USB Board
• USB Retractable Cable 
• Kit Installation CD (includes PSoC Programmer, .NET Framework 2.0, PSoC Express, CapSense Express Extension Pack, and CapSense Express Documentation)
• AAA Battery

The evaluation kit showcases the 16-Pin QFN CY8C201A0-LDX2I CapSense Express device providing the following interfaces: 

• 5 Segment CapSense Slider with Monitoring and Tuning for Sensitivity Adjustments
• 4 status LEDs
• 1 mechanical button
   

Software Title	Description	Link
PSoC Designer 5.0 SP6	This kit requires PSoC Designer 5.0 SP6
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: This kit requires the System Level functionality of PSoC Designer 5.0. This functionality does not exist in versions 5.1 or newer.

CY3290-TST242 Contents:

• TrueTouch® evaluation kit with 3.5” diagonal ITO panel enclosed in plastic casing
• USB cable
• USB drive with documentation, TrueTouch® Host Emulator, and design files

To order this kit, send a request to truetouch@cypress.com.

* Internal customers can submit a request via the MySamples link on the intranet.

CY3218-CAPEXP1 Kit Contents:

• CY3218-CAPEXP1 CapSense Express Evaluation Board
• CY3240-I2USB Board
• USB Retractable Cable 
• Kit Installation CD (includes PSoC Programmer, .NET Framework 2.0, PSoC Express, CapSense Express Extension Pack, and CapSense Express Documentation)
• AAA Battery

The evaluation kit showcases the 16-Pin QFN CY8C20110-LDX2I CapSense Express device providing the following interfaces: 

• 3 CapSense buttons with Monitoring and Tuning for Sensitivity Adjustments
• 3 backlighting LEDs
• 3 status LEDs
• 1 mechanical button
   

CapSense Express is part of the PSoC Mixed-Signal Array Product line but individual CapSense Express device information needs to be accessed via the individual part number links in the line below titled Related Part Numbers.

Software Title	Description	Link
PSoC Designer 5.0 SP6	This kit requires PSoC Designer 5.0 SP6
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: This kit requires the System Level functionality of PSoC Designer 5.0. This functionality does not exist in versions 5.1 or newer.

CY3280-BK1 Kit Contents:

• CY3280-20x34 Universal CapSense Controller Board
• CY3280-21x34 Universal CapSense Controller Board
• CY3280-SLM Universal CapSense Linear Slider Module
• CY3280-BBM Universal CapSense Prototyping Module
• CY3240-I2USB Board
• CY3210 MiniProg1 Programmer
• USB 2.0 Retractable Cable
• PSoC Express Installation CD
• PSoC Designer and PSoC Programmer Installation CD
• CY3280-BK1 Universal CapSense Controller Kit CD
• 1.5 mm and 3 mm Polycarbonate Overlays
   

Hardware Description

The CY3280-BK1 Universal CapSense Controller Kit is designed for easy prototyping and debug of CapSense designs with pre-defined control circuitry and plug-in hardware.  The kit comes with controller boards for the CY8C20x34 and CY8C21x34 PSoC devices as well as a breadboard module and a button(5) / slider module.

 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

 

CY3295-TTBRIDGE DVK Contents:

• TrueTouch Bridge board
• Galvanic Isolation Dongle board
• 9-V Alkaline battery
• 9-V battery SNAP cable
• USB 2.0 certified cable
• Kit CD with PSoC Programmer
• Quick start guide

To order this kit, send a request to truetouch@cypress.com.

* Internal customers can submit a request via the MySamples link on the intranet.

CY3290-TMA884 Contents:

• TMA884 EVK Assembly with 10.1” diagonal touch screen panel
• TrueTouch® Bridge USB-to-I2C communications adapter
• TMA884 touchscreen controller board
• Flash drive containing supporting documentation and software

To order this kit, send a request to truetouch@cypress.com

* Internal customers can submit a request via the MySamples link on the intranet

CY3290-TMA300 DVK Contents:

• One DVK board with 3.5-inch diagonal ITO glass panel.
• One TrueTouch® Bridge board
• One stylus
• One USB 2.0 certified cable
• One kit CD
• Quick Start Guide

To order this kit, send a request to truetouch@cypress.com.

* Internal customers can submit a request via the MySamples link on the intranet.

CY3290-TMA400EVK Contents:

• TrueTouch® evaluation kit with 4.5” diagonal ITO panel enclosed in plastic casing
• USB Cable
• USB drive with documentation, TrueTouch® Host Emulator, and design files

To order this kit, send a request to truetouch@cypress.com.

* Internal customers can submit a request via the MySamples link on the intranet.

CY3290-TMG200 DVK Contents:

• DVK board with a TMG200 daughter board and 3.5-inch diagonal ITO glass panel
• MiniProg1 device
• CY3240 I 2C USB Bridge
• USB 2.0 certified cable
• Kit CD
• Quick Start Guide

To order this kit, send a request to truetouch@cypress.com.

* Internal customers can submit a request via the MySamples link on the intranet.

• Touch sensing buttons
• Upto ten CapSense buttons & ten LEDs/GPOs.
• World's easiest Capsense Solution.

ICE Debugging Support for Non-QFN CY8C21x34 PSoC Devices in a Prototype System or PCB

CY3250-21x34 Kit Contents:

• One (1) Non-QFN CY8C21x34 ICE Pod
• One (1) Flex Cable
• Two (2) 28-Pin SSOP Pod Feet

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 28-pin SSOP feet included but all other package feet sold separately.

Replacement ICE Pod Feet (4) for Debugging 20-Pin PDIP PSoC Devices 

CY3250-20PDIP-FK Kit Contents:

• Four (4) 20-Pin PDIP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 20-Pin SOIC PSoC Devices

CY3250-20SOIC-FK Kit Contents:

• Four (4) 20-Pin SOIC ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 20-Pin SSOP PSoC Devices

CY3250-20SSOP-FK Kit Contents:
 

• Four (4) 20-Pin SSOP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 24-Pin QFN PSoC Devices

CY3250-24QFN-FK Kit Contents:

• Four (4) 24-Pin QFN ICE Pod Feet

Replacement ICE Pods (2) for Debugging QFN CY8C21x34 PSoC Devices in a Prototype System or PCB

CY3250-21x34QFN-POD Kit Contents:

• Two (2) QFN CY8C21x34 ICE Pods

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Pod feet sold separately.

Replacement ICE Pod Feet (4) for Debugging 28-Pin PDIP PSoC Devices

CY3250-28PDIP-FK Kit Contents:

• Four (4) 28-Pin PDIP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 28-Pin SOIC PSoC Devices

CY3250-28SOIC-FK Kit Contents:

• Four (4) 28-Pin SOIC ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 32-Pin QFN PSoC Devices

CY3250-32QFN-FK Kit Contents:

• Four (4) 32-Pin QFN ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 44-Pin TQFP PSoC Devices

CY3250-44TQFP-FK Kit Contents:
 

• Four (4) 44-Pin TQFP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 48-Pin QFN PSoC Devices

CY3250-48QFN-FK Kit Contents:

• Four (4) 48-Pin QFN ICE Pod Feet

Hardware Description
 

Replacement ICE Pod Feet (4) for Debugging 48-Pin SSOP PSoC Devices

CY3250-48SSOP-FK Kit Contents:

• Four (4) 48-Pin SSOP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 56-Pin QFN PSoC Devices

CY3250-56QFN-FK Kit Contents:

• Four (4) 56-Pin QFN ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 8-Pin PDIP PSoC Devices

CY3250-8PDIP-FK Kit Contents:

• Four (4) 8-Pin PDIP ICE Pod Feet

Hardware Description

CY3250-8PDIP-FK contains four (4) 8-pin PDIP ICE pod feet for debugging 8-pin PDIP PSoC devices with the CY3215-DK In-Circuit Emulator (ICE) and accessory CY3250-2xxxx ICE Pod Kits. CY3215-DK and CY3250-2xxxx kits sold separately.

Replacement ICE Pods (2) for Debugging Non-QFN CY8C21x34 PSoC Devices in a Prototype System or PCB

CY3250-21x34-POD Kit Contents:

• Two (2) Non-QFN CY8C21x34 ICE Pods

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Pod feet sold separately.

Replacement ICE Pod Feet (4) for Debugging 28-Pin SSOP PSoC Devices

CY3250-28SSOP-FK Kit Contents:

• Four (4) 28-pin SSOP ICE Pod Feet

Hardware Description

CY3250-28SSOP-FK contains four (4) 28-pin SSOP ICE pod feet for debugging 28-pin SSOP PSoC devices with the CY3215-DK In-Circuit Emulator (ICE) and accessory CY3250-2xxxx ICE Pod Kits. CY3215-DK and CY3250-2xxxx kits sold separately.
 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

CY3210-24x94 Kit Contents:

• One (1) CY8C24x94 PSoC EvalPod

CY3210-20x34 Kit Contents:

• One (1) CY8C20x34 PSoC EvalPod

Overview:

PSoC EvalPods are 28-pin PDIP adapters that seamlessly connect any PSoC device to the 28-pin PDIP connector on any Cypress PSoC developer kit. CY3210-21x34 provides evaluation of the CY8C21x34 PSoC device family on any PSoC developer kit. PSoC developer kits sold separately.

CY3210-21x34 Kit Contents:
 

• One (1) CY8C21x34 PSoC EvalPod

ICE Debugging Support for QFN CY8C24x94 PSoC Devices in a Prototype System or PCB

CY3250-24x94QFN Kit Contents:
 

• One (1) QFN CY8C24x94 ICE Pod
• One (1) Flex Cable
• Two (2) 56-Pin QFN Pod Feet

Replacement ICE Pods (2) for Debugging QFN CY8C24x94 PSoC Devices in a Prototype System or PCB

CY3250-24x94QFN-POD Kit Contents:

• Two (2) QFN CY8C24x94 ICE Pods

Overview:
Development Kit includes:
 

• Main Development Board
• Four Fan Modules
• Two Proto Modules
• MiniProg in-system Programmer
• Universal 110/220 Power supply & European Adapter
• PSoC Express CD-ROM
• USB 2.0 Cable
• Jumper Wire Kit
• Serial Cable
• Six 28-pin DIP samples, including:two CY8C24423A-24PXItwo CY8C27443-24PXItwo CY8C29466-24PXI
• Printed documentation

For complete development kit selection information, download the PSoC Development Tools selector guide, New PSoC Development Tools Selector Guide.

Hardware Description

Supports all active PSoC mixed-signal array families except CY8C42x23.

• One (1) QFN CY8C24994 ICE Pod
• One (1) Flex Cable
• Two (2) 68-Pin QFN Pod Feet

CY3250-20434QFN-POD Kit Contents:
 

• Two (2) QFN CY8C20434 ICE Pods

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Pod feet sold separately.

• One (1) CY8C20x34 ICE Pod
• One (1) Flex Cable
• Two (2) 28-pin SSOP Feet
• Two (2) CY8C20534-12PVXI (28-pin SSOP) samples

Description:
CapSense Express Evaluation kit with SmartSense™ Auto-Tuning.

Features:

• Touch sensing buttons
• Upto four CapSense buttons & four LEDs/GPOs.
• World's easiest Capsense Solution.

Kit contents :

• CY3280-MBR Kit
• Two AAA batteries
• Overlay - Clear acrylic overlays with matt finish on one side in 1 mm, 2 mm, and 3 mm thickness.
• 2 mm thick overlay is stuck to the board
• Axial capacitors 10 pF, 22 pF, 68 pF
• Quick Start Guide

CY3250-20334QFN-POD Kit Contents:

• Two (2) QFN CY8C20334 ICE Pods
   

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Pod feet sold separately.

This development kit is no longer available. This web page has been left in place for informational purposes only.

• CY3280-BK1
• CY3280-20x66
• CY3280-22x45
• CY3280-28xxx
• CY3280-24x94

Hardware Description

Supported devices include CY8C21234, CY8C21334, CY8C21434, CY8C21534, CY8C21634, CY8C24794 and CY8C24894.

• Two (2) CY8C20536/546/566A ICE Pods
   

Hardware Description:

Replacement ICE Debugging Support for 48-pin SSOP CY8C20536A-24PVXI, CY8C20546A-24PVXI, and CY8C20566A-24PVXI CapSense PSoC Devices in a Prototype System or PCB.

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. POD feet sold separately.

• Two (2) CY8C20336/46A ICE Pods
   

Hardware Description:

Replacement ICE Debugging Support for 24-pin CY8C20336A-24QKXI and CY8C20346A-24LQXI CapSense PSoC Devices in a Prototype System or PCB.

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. POD feet sold separately.

• Two (2) CY8C20636/646/666A ICE Pods
   

Hardware Description:

Replacement ICE Debugging Support for 48-pin QFN CY8C20636A-24LTXI, CY8C20646A-24LTXI, and CY8C20666A-24LTXI CapSense PSoC Devices in a Prototype System or PCB.

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. POD feet sold separately.

• Two (2) CY8C20236/46A ICE Pods

Hardware Description:

Replacement ICE Debugging Support for 16-pin QFN CY8C20236A-24LKXI and CY8C20246A-24LKXI CapSense PSoC Devices in a Prototype System or PCB.

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. POD feet sold separately.

• Two (2) QFN CY8C20436/46/66 ICE Pods
   

Hardware Description:
Replacement ICE Pods for Debugging 32-pin QFN CY8C20436/20446/20466 CapSense PSoC Devices in a Prototype System or PCB

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. ICE and pod feet sold separately.

Please visit the Getting Started with PSoC 1 page which will guide you through your first steps. It provides basic information about software, technical documentation, training and support infrastructure.

Featuring

• High performance SAR ADC (10-bit with Sample & Hold)
• Dual Channel robust capacitive touch-sensing interfaces
• Enhanced PSoC digital and analog resources for CapSense Plus™
• Hardware Real-Time Clock
• Dual Hardware I2C with hardware address matching

Kit Contents:

• CY3280-28XXX Universal CapSense Controller Board
• CY3280-28XXX Universal CapSense Controller Board CD
• CY3240-I2CUSB Board
• CY3210-MiniProg1 Programmer
• PSoC Designer 5.0 SP6 CD

Hardware Description

Please visit the Getting Started with PSoC 1 page which will guide you through your first steps. It provides basic information about software, technical documentation, training and support infrastructure.

Kit Content:

• PSoC CY8C28 Family Processor Module
• Printed Documentation
  • Quick Start
  • Schematic PSoC Development Board Design
• Software CD for PSoC 1, which includes
  • PSoC® Designer™ IDE
  • PSoC® Programmer™ Software
  • CY8C28 Data Sheets
  • Example Project Files, Firmware, and Documentation

Hardware Description:

The PSoC® CY8C28 Family Processor Module is designed to evaluate and experiment with Cypress’s PSoC 1 programmable system-on-chip design methodology and architecture. This processor module can be used in conjunction with the PSoC Development Kit (CY8CKIT-001) to create designs utilizing on-board DVK resources or compatible expansion boards. This kit provides you with an additional processor module to use with different projects.

Please click here for further information and materials to get you started designing with CY8C28xxx PSoC devices.

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

• PSoCEvalUSB board
• LCD Module
• MIniProg programming unit
• USB mini cable
• PSoC Designer and Example Projects CD-ROM
• Getting Started Guide
• Wire pack

• CapSense Touch Sensing controlling the color of LEDs
• Temperature Sensing controlling the color and blinking rate of 3 LED and the sound of a buzzer
• Light Sensing controlling the intensity of a LED
• CapSense Proximity Sensing controlling the color of LEDs
   

• Additional designs possible utilizing above sensing and control functionality
• Functional pins are accessible for further evaluation and development
• Detachable multifunction expansion card enables adding the kit to system boards
• USB connectivity for convenient plug and play operation
   

To learn more about the PSoC FirstTouch Starter Kit, please visit www.cypress.com/go/FirstTouch.

To learn more about PSoC programmable system-on-chip, please visit www.cypress.com/go/PSoC.

To learn more about PSoC Designer software, please visit www.cypress.com/PSoCDesigner.

 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

The I2C-USB Kit allows one to test, tune and debug hardware and software of a PSoC application by bridging the USB port to I2C. Populated with the CY8C24894 PSoC device. A wide variety of devices can be connected to the PC using this bridge. Among them are: EEPROMs, realtime cLocks, ADC/DAC converters, LCD displays, regulated DC/DC converters, port expanders and many other devices incorporating the I2C interface. The number of devices that can be connected is constrained only by the I2C address limit and physical ability of the I2C bus.

Please visit the Getting Started with PSoC 1 page which will guide you through your first steps. It provides basic information about software, technical documentation, training and support infrastructure.

CY3240-I2USB Rev. A Contents:

• I2C-USB Bridge
• I2C Slave Demonstration Board
• USB Mini B Cable (6 feet)
• Supporting Software CD
   

Software Title	Description	Link
PSoC Programmer	This kit requires PSoC Programmer for programming

Related Resources:

Datasheets: CY8C21x23, CY8C24x94
Application Notes: AN2352

Kit Contents

• CY3280-CPM1 CapSense Plus Module Board
• CY3280-CPM1 Kit CD
• Quick Start Guide
   

• CY3280-22x45/CY3280-28xxx Universal CapSense Controller Board
• PSoC MiniProg
• USB Mini-B Cable
   

• CY3280-CPM1

Description:
CapSense 3280-SmartSense™ Auto-Tuning kit.

• PSoC programmable system-on-chip technology.
• CY8C20236A-24LKXI with SmartSense™ Auto-Tuning Technolgy.
• World’s easiest Capsense Solution.

• CY3280-SLM Linear Slider Module Board
• CY3280-SLM Quick Start Guide
• CY3280-SLM Kit CD
• One 1.5mm Acrylic Overlay
• One 3mm Acrylic Overlay
   

1. Any CY3280 Universal CapSense Controller Board
2. CY3210-MiniProg
3. CY3240-I2USB Bridge
4. USB Mini-B Cable

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

• CY3280-BMM Matrix Button Module Board
• CY3280-BMM Quick Start Guide
• CY3280-BMM Kit CD
• One 1.5mm Acrylic Overlay
   

1. Any CY3280 Universal CapSense Controller Board
2. CY3210-MiniProg
3. CY3240-I2USB Bridge
4. USB Mini-B Cable

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Kit Contents:

• CY3280-BBM Universal CapSense Prototyping Module
• CY3280-BBM Quick Start
• CY3280-BBM Universal CapSense Prototyping Module Kit CD

Hardware Description
 

• One (1) CY8C20436/46/66 ICE Pod
• One (1) Flex Cable
• Two (2) 32-pin QFN Pod Feet

Hardware Description:
ICE Debugging Support for 32-pin QFN CY8C20436/46/66 CapSense PSoC Devices in a Prototype System or PCB.

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 32-pin QFN feet included.

Replacement In-Circuit Emulation (ICE) Pods

• One (1) CY8C20236/46A ICE Pod
• One (1) Flex Cable
• Two (2) 16-pin QFN Pod Feet
   

Hardware Description:
 ICE Debugging Support for 16-pin QFN CY8C20236A-24LKXI and CY8C20246A-24LKXI CapSense PSoC Devices in a Prototype System or PCB.

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 16-pin QFN feet included.

CY3250-20666QFN Kit Contents:

• One (1) CY8C20636/646/666A ICE Pod
• One (1) Flex Cable
• Two (2) 48-pin QFN Pod Feet
   

Hardware Description:

CY3250-20566QFN Kit Contents:

• One (1) CY8C20536/546/566A ICE Pod
• One (1) Flex Cable
• Two (2) 48-pin SSOP Pod Feet
   

Hardware Description:
 ICE Debugging Support for 48-pin SSOP CY8C20536A-24PVXI, CY8C20546A-24PVXI, and CY8C20566A-24PVXI CapSense PSoC Devices in a Prototype System or PCB.

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 48-pin SSOP feet included.

CY3250-20346QFN Kit Contents:

• One (1) CY8C20336/346A ICE Pod
• One (1) Flex Cable
• Two (2) 24-pin QFN Pod Feet
   

Hardware Description:
 ICE Debugging Support for 24-pin QFN CY8C20336A-24QKXI and CY8C20346A-24LQXI CapSense PSoC Devices in a Prototype System or PCB.

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator (ICE) via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 24-pin QFN feet included.

CY3250-20434QFN Kit Contents:

• One (1) QFN CY8C20434 ICE Pod
• One (1) Flex Cable
• Two (2) 32-Pin QFN Pod Feet

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 32-pin QFN pod feet included.

ICE Debugging Support for QFN CY8C21x34 PSoC Devices in a Prototype System or PCB

CY3250-21x34QFN Kit Contents:

• One (1) QFN CY8C21x34 ICE Pod
• One (1) Flex Cable
• Two (2) 32-Pin QFN Pod Feet

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 32-pin QFN pod feet included.

CY3250-20334QFN Kit Contents:

• One (1) QFN CY8C20334 ICE Pod
• One (1) Flex Cable
• Two (2) 24-Pin QFN Pod Feet

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 24-pin QFN pod feet included.

The CY3210-MiniProg1 is an inexpensive evaluation kit that allows you to program PSoC(R) devices using the MiniProg programming unit. A MiniEval PCB is also included in the kit for your use.

The MiniEval PCB is a programming and evaluation board that allows DIP device socket programming. The MiniEval board also includes LEDs and a POT for simple evaluation and demonstration, but does not include a prototyping area. The MiniProg uses a 5-pin ISSP (In-System Serial Programming) header to program PSoC devices on the MiniEval PCB or directly on a target board. To learn how to prepare your target board for ISSP.

User’s interested in purchasing just the Minprog1 programmer without the development board, please click here.

Hardware Description

Supports all PSoC Programmable System-On Chip families, including automotive, except CY8C25/26xxx devices.

Kit Includes:

• MiniProg Programming unit
• MiniEval Socket Programming and Evaluation board
• 28 pin CY8C29466-24PXI PDIP PSoC Device Sample
• PSoC Designer Software CD
• Getting Started Guide
• USB 2.0 Cable

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Related Resources:

Datasheet: CY8C29x66

CY3218-CAPEXP3 Kit contents:

• CY3218-CAPEXP3 CapSense Express Evaluation Board
• CY3240-I2USB Board
• USB Retractable Cable 
• Kit Installation CD (includes PSoC Programmer, .NET Framework 2.0, PSoC Express, CapSense Express Extension Pack, and CapSense Express Documentation)
• AAA Battery

The evaluation kit showcases the 8-Pin SOIC CY8C20142-SX2I CapSense Express device providing the following interfaces:

• 2 CapSense buttons with Monitoring and Tuning for Sensitivity Adjustments
• 2 status LEDs

CapSense Express is part of the PSoC Mixed-Signal Array Product line but individual CapSense Express device information needs to be accessed via the individual part number links in the line below titled Related Part Numbers.

Software Title	Description	Link
PSoC Designer 5.0 SP6	This kit requires PSoC Designer 5.0 SP6
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: This kit requires the System Level functionality of PSoC Designer 5.0. This functionality does not exist in versions 5.1 or newer.

• I2C Port Expander Evaluation Board
• I2C-USB Bridge
• USB Cable (6ft/2m)
• 5V-2A DC Power Supply
• Strip of 10 Post Shunts
• I2C Port Expander Evaluation Kit Mini-CD
   

• Integration
• Flexibility
• Compatibility

Cypress' three I2C port expander devices (CY8C9520, CY8C9540, CY8C9560) have the following features:

• Three compatible part families that seamlessly scale up or down
• 20, 40, or 60 individually configurable IO (widest range of IOs in the industry)
• 4, 8, or 16 PWMs that map to any pin or multiple pins (Widest range of PWMs in the industry)
• 3 Kbytes, 11 Kbytes, or 27 Kbytes of User EEPROM (largest amount of user-accessible serial EEPROM in the industry)
• I2C communication up to 400 kHz
• Industrial temp range: -40 to 85 degrees Celsius
• Operating voltage: 3.0V - 5.25V
• 28-SSOP/48-SSOP/100-TQFP package options

Bottom line: One Cypress I2C Port Expander device replaces multiple port expander ICs from other vendors and flexibly integrates IO expansion, PWM functions and user EEPROM.

This kit also includes the I2C-USB Bridge, which allows hardware and software debugging of PSoC applications by seamlessly connecting your PC's USB port to your application's I2C interface.

Kit Contents:

• CY3280-24x94 Universal CapSense Controller Board
• CY3240-I2USB Bridge Board
• CY3210 PSoC MiniProg1 Programmer
• CY3280-24x94 Quick Start
• USB Retractable Cable (A to mini-B)
• PSoC Express Installation CD
• PSoC Designer and PSoC Programmer CD
• CY3280-24x94 Universal CapSense Controller Kit CD

Hardware Description

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

CY3235-ProxDet Rev. B Kit Contents:

• Proximity Detection Demo Board w/Antenna
• I2C to USB Debugging/Communication Bridge
• USB A to Mini-B Cable (3 feet)
• Supporting Software CD
• CY3235-ProxDet Quick Start Guide
• One CY8C24894 PSoC device on I2C-USB Bridge
• One CY8C21434 PSoC device on Proximity Detection Demo Board
• One free sample PSoC device (CY8C24894)

Hardware Description

The Proximity Detection Demo Kit allows quick and easy demonstration of a PSoC CapSense-enabled device (CY8C21434) to accurately sense the proximity of a hand or finger along the length of a wire antenna. The kit also includes the I2C-USB Bridge, which allows hardware and software debugging of PSoC applications by seamlessly connecting your PC's USB port to your application's I2C interface.

Prerequisites:

CY3217- MiniProg1 Programmer - The PSoC Programmer (CY3217-MiniProg1) is required to program the PSoC device and is available for purchase separately at http://www.cypress.com/?rID=37459. The MiniProg provides the ability to program any Cypress PSoC device quickly and easily.

Updated projects using the CSD UM is available in the Related Files box below.

Related Resources:

Datasheets: CY8C21x34, CY8C24x94
Application Notes: AN2352

 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

The CY3280-HEM  Kit is designed for easy evaluation of the CY8C20xx6H series of devices (to be used with a Universal CapSense Controller Kit) . This evaluation module kit is a combination of a 16-button matrix buttons and a single segment slider , along with an additional Haptics-enabled daughter card.

Introduction to the CY8C20xx6H family :

The CY8C20xx6H product family enables dynamic tactile feedback providing immediate confirmation of touch. The solution integrates Immersion TS2000 Haptics effects library for ERM (Eccentric Rotating Motor) drive control.  Immersion’s 14 pre-defined effects, allow dynamic tactile feedback that enables users to experience a “touch back,” supplying intuitive yet unmistakable confirmation. This feature enables a unique bi-directional communication channel that provides tremendous benefits that include user interface paradigms that are either impossible or extremely difficult to produce without it.

Introduction to the CY8C21x34B family :
The CY8C21x34B family of CapSense controllers is ideal for proximity sensing and water tolerant designs. Enabled with SmartSense™ Auto-tuning, this family is easy to use and significantly reduces the design cycle time by eliminating the tuning process throughout the entire product development cycle from prototype to mass production. SmartSense tunes each CapSense sensor automatically at power up and then monitors and maintains optimum sensor performance during run time. This technology adapts for manufacturing variation in PCBs, overlays and noise generators such as LCD inverters, AC line noise and switch mode power supplies and automatically tunes them out.

Includes two Fan Modules and printed documentation. Requires CY3210-ExpressDK. CY3210-FanMod and CY3210-ExpressDK are available in the Cypress Online Store.