CY3236A-PIRMOTION Rev. A Kit Contents:

• PIR Motion Sensor Board using CY8C27443-24PVXI PSoC(R) device
• 12V Power Supply
• PSoC Designer(TM) and PSoC Programmer CD
• Design Files CD (Schematic, BOM, Gerber Files, PSoC Designer Example Project)

The ICE-Cube also serves as a single-site device programmer via an ISSP (In-System Serial Programming) Cable and MiniEval board included in the kit. The MiniEval board is a programming and evaluation board which connects to the ICE-Cube via an ISSP Cable and allows programming of DIP devices. There are also other Programming boards available for programming other packages. The MiniEval also includes LEDs and a POT for simple evaluation and demonstration.

PSoC 1 Debugger Includes:

• PSoC Designer Software CD-ROM
• ICE-Cube In-Circuit Emulator
• ICE Flex-Pod for CY8C29xxx Family
• Backward compatibility Cat-5 Adapter
• ISSP Cable
• Mini-Eval Programming Board in One
• USB 2.0 Cable and Blue Cat-5 Cable
• 110 ~ 240V Power Supply, Euro-Plug Adapter
• 2 CY8C29466-24PXI 28-PDIP Chip Samples

Supports following 8 bit PSoC1 (Programmable System-On Chip) families, including automotive, except CY8C25/26xxx devices.

PSoC 1 Getting Started Debugging - Part 1

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Related Resources:

This kit is specifically designed for analog performance. The noise floor on these kits is very low. Care has been taken to separate the analog and the digital domain, separate regulators are also available. Separate ground planes are provided. We have achieved ENOB very close to 20 bits on this kit. Provision has been provided to add an external precision voltage reference if needed.

Besides the analog, this kit is also meant to demonstrate the low power operation of PSoC3/PSoC5. PSoC3 chip is soldered to the board, this way the leakage currents are reduced significantly compared to the CY8CKIT-001. Special terminals are provided to enable the boost converter operation without much modifications. Jumpers have been provided to remove power to RS232 converter, Potentiometer and to have a single regulator for Analog and digital domain and evaluate the low power operation of PSoC3.

It has got an onboard programmer(Cypress USB chip based), which lets you program PSoC3/PSoC5 without connecting Miniprog3. Provision has been provided to program using Miniprog3 as well.

Kit Contents:

• PSoC 3 Development Board
• LCD Character Display
• USB Cable
• Quick Start Guide
• Kit CD, which includes: PSoC Creator, PSoC Programmer, Projects and Documentation
   

For PSoC training, please visit http://www.cypress.com/go/training.

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

NOTE: As stated above, the purpose of this kit is to get you acquainted with the PSoC 3 architecture and software tools. For full development and evaluation purposes, we recommend you use one of our full development kits: PSoC 3 Development Kit (CY8CKIT-030) or PSoC Development Kit (CY8CKIT-001).

Kit Contents:

• PSoC 3 FirstTouch Board
• USB Cable
• 9V Battery
• Proximity Wire (for use as a Proximity Detection Antenna)
• Quick Start Guide
• Kit CD, which includes: PSoC Creator™, Kit Projects, and Documentation

For PSoC training, please visit http://www.cypress.com/go/training.

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: The installation file will install the sample projects onto your system

Kit Contents:

• PSoC® CY8C38 Family Processor Module
• Kit CD, which includes: PSoC Creator™, PSoC Programmer, and Documentation

For PSoC training, please visit http://www.cypress.com/go/training.
 

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: The installation file will install the sample projects onto your system

Kit Upgrade: Now it’s time to make the upgrade to PSoC® 5LP Processor Module and take advantage of all that PSoC has to offer.

These upgrades are FREE to our valued customers. Log on to http://www.cypress.com/go/psockitupgrade to know more details. Cypress appreciates your business and continued loyalty.

Kit Contents:

• PSoC Development Board 
• PSoC 1 CY8C28 Family Processor Module
• PSoC 3 CY8C38 Family Processor Module
• PSoC 5 CY8C58LP Family Processor Module
• MiniProg3 Program/Debug Device
• Program/Debug Ribbon Cable
• USB Cable
• 12V AC Power Adapter
• Quick Start Guide
• Kit CDs, which includes: PSoC Creator™, PSoC Designer™, PSoC Programmer, Projects, and Documentation

For PSoC training, please visit http://www.cypress.com/go/training.

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

See how you can integrate thermal management functions in a single low-cost PSoC 1 device:

1. Closed-loop 4-wire fan control
2. Temperature measurement
3. Fan Speed Control based on temperature measurement
4. Display

Required Hardware

CY8CKIT-001 PSoC Development Kit (sold separately) The CY8CKIT-001 PSoC Development Kit (DVK) allows you to evaluate the PSoC 1, PSoC 3, and PSoC 5 families. Place the Processor Module families (included) on the DVK and program it with the CY8CKIT-016 PSoC Thermal Management kit example project using the MiniProg3 Program device.

CY8CKIT-036 PSoC Thermal Management Expansion Board Kit (sold separately) The CY8CKIT-036 PSoC Thermal Management Expansion Board Kit (EBK) connects to the CY8CKIT-001. Kit Contents: Two 4-wire fans and connectors for two additional 4-wire fans Digital (I2C-based TMP175, One-wire DS1820, PWM output TMP05) and Analog (Diode) temperature sensors I2C/SMBus/PMBus host interface   The EBK connects to the CY8CKIT-001 PSoC Development Kit for operation.

Easy to use Modular Design

The CY8CKIT-001 PSoC 1 Development Kit allows you to evaluate Cypress's PSoC 1, PSoC 3 and PSoC 5 families. The modular design allows you to interface with different types of Expansion Board Kits. In this case the CY8CKIT-036 plugs onto the CY8CKIT-001, which uses the firmware example project of the CY8CKIT-016 to demonstrate Thermal Management functions.

CY8CKIT-001 PSoC DVK	CY8CKIT-036		CY8CKIT-016
PSoC 1 CY8C28 Family Processor Module

Example Project Description

Example firmware provides a quick demonstration of a two-zone Thermal Management system. Zone 1 consists of a 4-wire fan, the I2C temperature sensor and a potentiometer that simulates a diode. Zone 2 consists of the other 4-wire fan, a PWM output temperature sensor and a 1-wire temperature sensor. Fan RPM is controlled based on the weighted average readings of temperature sensors in their zones. Fan RPM zone temperature readings and fan faults are displayed in LCD.
 

PSoC One-chip Solution
 

This Thermal Management solution is used by Tier 1 Customers in Data and Telecom equipment. It can be your solution as well. Options include:

1. Driving up to 8 fans in closed-loop or open-loop
2. Interfacing with Multiple Digital and Analog Sensors
3. Communicating via I2C, SPI, UART or PMBus* and SMBus*

*SMBus and *PMBus with PSoC 1 are under development

To learn more, download these App Notes.

To know more about PSoC 1, click here. To know more about other PSoC 1 kits, click here.
 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	PSoC programmer is required every time the PSoC 1 (CY8C28) Family Processor Module is programmed

This processor module must be used in conjunction with the PSoC Development Kit (CY8CKIT-001) to create designs utilizing on-board DVK resources or compatible expansion boards. This kit provides you with an additional processor module to use with different projects.

Kit Contents:

• PSoC® CY8C58LP Family Processor Module
• Kit CD, which includes: PSoC Creator™, PSoC Programmer, and Documentation

For PSoC training, please visit  http://www.cypress.com/go/training .

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: The installation file will install the sample projects onto your system

 
Features:

• User friendly PLC Control Panel Application available on kit CD
• CY8CPLC20-OCD – 100-pin TQFP on-chip debug (OCD) device that allows quick design and debug of a PLC application. The CY8CPLC20 100-pin TQFP is available for debug purposed only. For production quantities, CY8CPLC20 is available in 28-pin SSOP and 48-pin QFN packages.
• Chip power supply derived from 90V to 264V AC
• User configurable general purpose LEDs
• General purpose 8-bit DIP switch
• On board surge protection and isolation circuit
• RJ45 connector to use ICE debugger
• RS232 COM port for communication
• Header to attach LCD card
• I2C header for communicating to external device
• ISSP header for programming the CY8CPLC20

 
Kit Contents:

• CY3274 Quick Start Guide
• CY3274 PLC HV Development Board
• CDs containing:
  • Packet Test Software – PLC Control Panel Application
  • CY8CPLC20 Data Sheet
  • Development Board User Guide
  • Application Note – Using CY8CPLC20 in Powerline Communication (PLC) Applications
  • CY3274 Board Schematics
  • CY3274 Board Gerbers
  • PSoC Designer™
  • PSoC Programmer
• AC Power Cable
• MiniProg1 to Program CY8CPLC20
• 25 Jumper Wires
• LCD Module
• USB-I2C Bridge
• Retractable USB Cable
• Five CY8CPLC20-28PVXI Device Samples

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming
Powerline Communcation	PLC Contol Panel Application

Additionally, this kit supports the PSOC Expansion Board Kit ecosystem as a compatible host platform. This kit is for PSoC 5LP development specifically, and the PSoC 3 version of the same kit can be purchased from www.cypress.com/go/cy8ckit-030.

This kit is specifically designed for analog performance. The noise floor on these kits is very low. Care has been taken to separate the analog and the digital domain, separate regulators are also available. Separate ground planes are provided. We have achieved ENOB very close to 20 bits on this kit. Provision has been provided to add an external precision voltage reference if needed.

Besides the analog, this kit is also meant to demonstrate the low power operation of PSoC 5LP.The PSoC 5LP chip is soldered to the board, this way the leakage currents are reduced significantly compared to the CY8CKIT-001. Special terminals are provided to enable the boost converter operation without many modifications. Jumpers have been provided to remove power to RS232 converter, Potentiometer and to have a single regulator for Analog and digital domain and evaluate the low power operation of PSoC 5LP.

It has got an onboard programmer(Cypress USB chip based), which lets you program PSoC 3/PSoC 5LP without connecting Miniprog3. Provision has been provided to program using Miniprog3 as well.

Kit Upgrade: It is time to make upgrade from CY8C55 silicon based PSoC 5 DVK to CY8C58LP silicon based PSoC 5LP DVK. This upgrade is FREE to our valued customers. Log on to http://www.cypress.com/go/psockitupgrade to know more details. Cypress appreciates your business and continued loyalty.

Kit Contents:

• PSoC 5LP Development Board
• LCD Character Display
• USB Cable
• Quick Start Guide
• Kit CD, which includes: PSoC Creator, PSoC Programmer, Projects and Documentation
   

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

• Rapid fault detection capabilities for high-availability systems
• Accurate and reliable power rail sequencing of both power-on and power-off for four different power converters
• Voltage and current monitoring of four different power converters
• Trimming for closed-loop control of the power converters
• Margining of power converters for developmental test purposes
• EEPROM based data logging capabilities
• I2C/SMbus/PMbus host interface

Cypress’s PSoC Power Supervision solution delivers all of these capabilities, supporting the largest number of power converters in a single chip. In addition, this solution provides you with flexibility to customize this solution for your specific application and the ability to further integrate disparate functionality like fan control, reset-control logic, I2C level translators, etc.

The PSoC Power Supervision Expansion Board Kit enables you to evaluate System Power Supervision functions and capabilities of the PSoC architecture. It is part of the PSoC development kit ecosystem and requires a host development board in order to use it. It is designed to work with the CY8CKIT-001 PSoC Development Kit (sold separately) or the CY8CKIT-030 PSoC 3 Development Kit (sold separately). You can evaluate the example projects described in this guide or design and customize your own System Power Supervision solution using components in Cypress's PSoC Creator™ software (included) or by altering example projects provided with this kit.

CY8CKIT-035 connected to the CY8CKIT-030	Voltage Sequencer Component in PSoC Creator

With the flexibility of the PSoC architecture, you can easily create your own custom Power Supervision solution on chip with the exact functionality you need, in the way you want it – no more, no less.

Note: For PSoC 1 power supervision example project using CY8CKIT-035, please click here.
 

Kit Contents:

• PSoC® Power Supervision Expansion Board
• Quick Start Guide
• Power DC Adaptor 12V/2A
• System CD containing:
  • User’s Guide
  • PSoC Creator™ and pre-requisite software
  • PSoC Programmer and pre-requisite software
  • Example Projects: (for both CY8CKIT-001 and CY8CKIT-030)
    • Advanced Sequencer
    • Power Supervisor
  • Application Notes and Key Component Datasheets
• CY8CKIT-015 CD Containing
  • PSoC 1 Power Supervision Example Project
  • PSoC 1 Power Supervision Application Note
  • User's Guide for implementing PSoC 1 Power Supervision Solution
  • PSoC Designer™ and pre-requisite software
  • PSoC Programmer and pre-requisite software

For PSoC training, please visit http://www.cypress.com/go/training.

This kit can also be purchased from Terasic

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Cypress’s CY8CKIT-033 PSoC 3 MFi Digital Audio Development Kit is the most comprehensive and proven development and reference design platform for high-quality audio and music accessory products that connect to Apple’s iPod, iPhone and iPad devices, like Sonoma Wire Works’ GuitarJack, and many others.

The kit includes license-free reference hardware and firmware that comes very close to a finished product, and is your quickest path to turn your MFi music products from concept to production.

In addition, utilize Cypress’s EA Console iOS app to jump-start development with the External Accessory framework, enabling communication between apps and accessories attached to an Apple device. Also, the CY8CKIT-033 PSoC 3 MFi Digital Audio Development Kit works with any Core Audio or Core MIDI compatible iOS apps, like Apple’s GarageBand.

The CY8CKIT-033 PSoC 3 MFi Digital Audio Development Kit is available only to licensees of Apple's MFi program, through Apple’s authorized MFi component distributor.

For more information on the MFi program, visit http://developer.apple.com/MFi.
 

• Made for iPod, iPhone and iPad
• Mac/PC connectivity via USB
• Self-powered, Apple-device-powered or USB-bus-powered
• USB audio streaming input and output, with bit-perfect USB audio clock synchronization and recovery
• 16-/24-bit audio, 44.1/48 KHz sampling rate
• USB MIDI input and output
• External Accessory framework for app ↔ accessory communication and interaction
• CapSense buttons and slider
• Integrated over-current protection for iPad charging
• Multiple bootloader options (MFi, USB, etc) for seamless firmware upgrades
• Component/Composite video output
• Expansion header for prototyping and development purposes
   

• CY8CKIT-033 PSoC 3 MFi Digital Audio Development Kit
• CY8CKIT-002 PSoC MiniProg3 Program and Debug Kit
• 2 x 3.5mm audio cables
• Quick Start Guide
   

NOTE: CY8CKIT-033 has been fully tested to work with PSoC Creator 2.0 (including Component Pack 3). Compatibility testing with PSoC Creator 2.1 is underway. So, at this moment, please use CY8CKIT-033 with PSoC Creator 2.0 (with Component Pack 3).
 

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

The PSoC Development Kit includes an In-Circuit Emulator (ICE) which consists of a base unit, USB 2.0 cable, and power supply. The base unit is connected to the host PC via the USB port. The ICE is driven by the Debugger subsystem of PSoC Designer. This software interface allows the user to run, halt, and single step the processor. It also allows the user to set complex event points. Event points can start and stop the trace memory on the ICE, as well as break the program execution. In addition to the Development Kit, different Emulation Pods are available to support the range of devices in the PSoC family. They plug into (or are soldered onto) the user's circuit board to provide the physical interface. Pods are available for low-cost expansion of the ICE-Cube capability.

The ICE-Cube also serves as a single-site device programmer via an ISSP (In-System Serial Programming) Cable and MiniEval board included in the kit. The MiniEval board is a programming and evaluation board which connects to the ICE-Cube via an ISSP Cable and allows programming of DIP devices. There are also other Programming boards available for programming other packages. The MiniEval also includes LEDs and a POT for simple evaluation and demonstration.

Development Kit Includes:

• PSoC Designer Software CD-ROM
• ICE-Cube In-Circuit Emulator
• Backward compatibility Cat-5 Adapter
• ISSP Cable
• Mini-Eval Programming Board in One
• USB 2.0 Cable and Blue Cat-5 Cable
• 110 ~ 240V Power Supply, Euro-Plug Adapter
• 2 CY8C29466-24PXI 28-PDIP Chip Samples

Supports following 8 bit PSoC1 (Programmable System-On Chip) families, including automotive, except CY8C25/26xxx devices.

    CY8C20x34
    CY8C20xx6A
    CY8C21x23
    CY8C21x34
    CY8C22xxx/CY8C21x45
    CY8C23x33
    CY8C24x23A/CY8C24x33
    CY8C24x94
    CY8C27x43
    CY8C28xxx
    CY8C29x66
    CY8C95xx 
 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Discover how 736 segment LCD drive, configurable LCD pin selection, the ability to drive a 5V display on 0.5V of input and the ability to drive multiple displays on one PSoC device can translate to the ultimate in design freedom, lower BOM costs and new product differentiators with this easy to use evaluation kit.

The kit contains:

• PSoC 3 LCD Segment Drive Evaluation Board
• 9V Battery
• 12V Wall Power Supply
• MiniProg3 Programmer / Debugger
• USB Cable (to connect MiniProg3 to the PC)
• Kit Stand
• Quick Start Guide
• Kit CD, which includes: PSoC Creator, PSoC Programmer, Projects and Documentation
   

For PSoC training, please visit http://www.cypress.com/go/training.

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: The installation file will install the sample projects onto your system

The CY3210-ProtoMod kit is designed to work with the CY3210-ExpressDK.

Includes two Proto Modules and printed documentation. Requires CY3210-ExpressDK. CY3210-ProtoMod and CY3210-ExpressDK are available in the Cypress Online Store.

Hardware Description

This module kit supports the CY3210-ExpressDK.

The CY3217 is the base Miniprog1 kit. This kit will provide the user with a programming tool that can be used to program all PSoC1 devices, except the CY25/26xxx devices. The kit includes a Miniprog1 and USB cable. The Miniprog1 is included with many of the evaluation kits, but the CY3217 is the stand-alone Miniprog1 kit to be used across all Cypress PSoC kits.

Hardware Description

Supports all PSoC Mixed-Signal Array families, included automotive devices, but excluding the CY8C25/26xxx devices.

Kit Includes:

• Miniprog1 Programmer
• USB Cable

www.cypress.com/go/programming

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

• SWD
• JTAG
• ISSP
• USB-I2C

Included with the kit is a 10-pin ribbon cable for connecting to standard 10-pin JTAG header interfaces utilized for our PSoC 3 and PSoC 5 architectures while the device itself supports the 5-pin ISSP programming header for PSoC 1 architectures. The 5-pin connector also supports the USB-I2C Bridging capabilities and is a superset of the CY3240 capabilities. Please note, the CY8CKIT-002 only contains the Miniprog3 and supporting cables.

Kit Upgrade: Now it’s time to make the upgrade to MiniProg3 revision *B if you wish to perform Power Cycle programming but have MiniProg3 revision *A (CY8CKIT-002). This upgrade is FREE to our valued customers.

Log on to www.cypress.com/go/psockitupgrade to know more details. Cypress appreciates your business and continued loyalty.

Miniprog3 *B Revision Update:

Cypress Semiconductor has completed a hardware update to the Miniprog3 to address hardware issues seen with programming, ESD, and power management. The Miniprog3 revision, either *A or *B, is indicated using sticker on the back of the programmer. The following are a list of updates made to the Miniprog3 *B programmer.

Updated Hardware to Improve Power Cycle Programming:

The Miniprog3 hardware has been updated to better improve power cycle programming for all PSoC devices. It was discovered that the Miniprog3 *A programmer revision did not correctly implement the power cycle programming methodology. Due to this issue the Miniprog3 *A programmer could not correctly support power cycle programming for PSoC 3 and PSoC 5 devices. This specifically impacts customers who do not route out the XRES line to the programming connector or disable the optional XRES line on certain devices. The *B revision of the Miniprog3 will support power cycle programming for all PSoC 3 and PSoC 5 devices.

Over-current and Non-Polarized Connection Updates:

There are known electrical risks to the Miniprog3 *A revision that have been addressed with the *B update. To address the electrical issues the Miniprog3 *B programmer has added ESD over-current protection to the USB lines and has added electrical protection to the 5 and 10-pin connectors in case of a reverse polarity condition.

Improved Voltage Detection Capabilities:

The Miniprog3 *B programmer has been updated to improve the voltage detection capabilities. The Miniprog3 will measure the target voltage within an accuracy of 20 mV for a range of 1.8V – 5.0V.

Supported Software:

The Miniprog3 *B programmer is supported on the latest release of PSoC Programmer. To download the latest release, please navigate to the PSoC Programmer web page:

www.cypress.com/go/psocprogrammer

The Miniprog3 programmer is part of a suite of programming options and programming content available to PSoC users. For customers who are looking for more information on general programming options and information please navigate to the web page linked below. On the General Programming web page we discuss all of the available programming options for customers including Software, Schematics, Programming Specifications, and 3rd party mass programming.

Features:

• 1 CAN transceiver circuit
• 2 LIN transceiver circuits
• Communication status LED indicators

Kit Contents:

• CY8CKIT-017 Quick Start Guide
• CY8CKIT-017 CAN/LIN Expansion Board

Hardware Requirements:

IMPORTANT: This kit is an expansion kit that requires the user to have prerequisite hardware to use this kit. Therefore, please read over the hardware prerequisites carefully to ensure that all necessary prerequisite hardware is already available.

Hardware Prerequisites	Minimum	Recommended
CY8CKIT-001 PSoC Development Kit	CY8CKIT-001B **
One of the following: Second CY8CKIT-001 kit and second CY8CKIT-017 kit Third-party CAN bus analyzer or emulator tool	CY8CKIT-001B ** CY8CKIT-017 *A
Third-party LIN bus analyzer
Male-to-male straight-through DB9 cable

System Requirements and Recommendations:

Hardware/Operating System Requirements	Minimum	Recommended
Processor Speed	2 GHz	2 GHz Dual Core
RAM	2 GB	3 GB
Free hard drive space	1 GB	1 GB
Screen resolution	1024x768	1280x1024
CD/DVD drive
USB	Full Speed	2.0 Hi-Speed
Windows XP (SP2 or higher), Vista, or Windows 7
Software Prerequisites	Minimum	Recommended
PSoC® Creator™	2.1 Build 607	2.1 Build 607 or later
Microsoft Internet Explorer	7	7
Adobe Reader (for viewing PDF Documentation)	7	7 or later
Windows Installer	3.1
.NET Framework	2.0 SP1
PSoC Programmer	3.15.2	3.15.2 or later
Keil Compiler	8.16	8.16 or later

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

This kit is designed for use with the CY8CKIT-001 PSoC Development Kit (sold separately), CY8CKIT-030 PSoC 3 Development Kit (sold separately) and CY8CKIT-050 PSoC 5 Development Kit (sold separately). The new PSoC® 3 and PSoC 5 architectures enable CapSense on all devices and the CapSense signals can be routed to any of the GPIO pins (up to 62). Due to the vast amount of programmable analog and digital resources available in these devices, as well as the higher performance CPUs and larger memory sizes, PSoC® 3 and PSoC 5 make great single chip solutions. Typically these applications have a microcontroller doing various functions and a separate CapSense solution. PSoC® 3 and PSoC 5 enable integration of these two devices into a single chip solution. What's more, PSoC® 3 and PSoC 5 CapSense leverages the revolutionary SmartSense™ auto tuning solution. Cypress's SmartSense solution is the industry's first and only true self-tuning system. This patent-pending solution optimizes parameters automatically during the design process, significantly reducing development time, while providing the most robust and quality CapSense solution on the market.

Kit Contents

The CY8CKIT-031 PSoC CapSense Expansion Board Kit includes:

• CY8CKIT-031 PSoC CapSense Expansion Board
• CY3280-BMM Universal CapSense Matrix Button Module Kit
• CY3280-SLM Universal CapSense Linear Slider Module Kit
• Two 1.5 mm overlay and one 3 mm overlay
• Quick Start Guide
• Resource CD

For PSoC training, please visit http://www.cypress.com/go/training.

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Please visit the Getting Started with PSoC 1 page which will guide you through your first steps. It provides basic information about software, technical documentation, training and support infrastructure.

Kit Contents

• CY3280-22x45 Universal CapSense Controller Board
• CY3280-22x45 Universal CapSense Controller Board CD
• Quick Start Guide
• CY3240-I2USB Bridge
• CY3210 MiniProg1 Programmer
• USB Cable
   

CY8C22x45 device series provides a low-cost platform solution for the applications where analog and digital integration is required along with a reliable touch-sensing. Some of the typical applications are as following:

• Home appliances
• Learning kits
• Automation
• Liquid level sensing
• Dispenser machines
• Medical instruments

Notes:

If external OSC used, please power the power with external supply not MiniProg1 or I2CUSB Bridge.

Click here to view the CapSense Plus demo video [English version]

Click here to view the CapSense Plus demo video [Chinese version]


Click here to view the LCD & CapSense demo video

 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

 

• Fan control of up to four 4-wire fans (both firmware or hardware based)
• Temperature sensing of a combination of six different analog and digital sensors
• EEPROM based data logging capabilities
• I2C/SMbus/PMbus host interface
• Thermal zone management: the relationship between temperatures and fan speeds
• Algorithms to detect thermal and cooling failures or warnings

Cypress’s PSoC Thermal Management solution provides you with the flexibility to directly control the greatest number of fans and interface to the largest set of digital or analog temperature sensors while at the same time enabling you to offload thermal management tasks typically performed in the host application processor. With this easy-to-use flexibility, you make the call regarding how much or how little you want controlled by the PSoC solution given your specific application.

The PSoC Thermal Management Expansion Board Kit enables you to evaluate System Thermal Management functions and capabilities of the PSoC architecture. It is part of the PSoC development kit ecosystem and requires a host development board in order to use it. It is designed to work with the CY8CKIT-001 PSoC Development Kit (sold separately) or the CY8CKIT-030 PSoC 3 Development Kit (sold separately). You can evaluate the example projects described in this guide or design and customize your own System Thermal Management solution using components in Cypress's PSoC Creator™ software (included) or by altering example projects provided with this kit.

CY8CKIT-036 connected to the CY8CKIT-030	Fan Controller Component in PSoC Creator

With the flexibility of the PSoC architecture, you can easily create your own custom Thermal Management solution on chip with the exact functionality you need, in the way you want it – no more, no less.

Kit Contents:

• PSoC® Thermal Management Expansion Board
• Quick Start Guide
• Power DC Adaptor 12V/2A
• System CD containing:
  • User’s Guide
  • PSoC Creator™ and pre-requisite software
  • PSoC Programmer and pre-requisite software
  • Example Projects: (for both CY8CKIT-001 and CY8CKIT-030)
    • Firmware based (open loop) Fan Control
    • Hardware based (closed loop) Fan Control
    • Thermal Management System
  • Application Notes and Key Component Datasheets

For PSoC training, please visit http://www.cypress.com/go/training.
This kit can also be purchased from Terasic

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Replacement ICE Pods (2) for Debugging Non-QFN CY8C24x23A PSoC Devices in a Prototype System or PCB

CY3250-24x23A-POD Kit Contents:

• Two (2) Non-QFN CY8C24x23A ICE Pods

The CY3207ISSP PSoC In-System Serial Programmer programs PSoC ICs with HEX files created with Cypress' PSoC Designer software.

The ISSP programs a single PSoC IC in one of three ways:

1. mounted on your PCB.
2. inserted into the ISSP socket.
3. via a test fixture.

The ISSP connects to your PC via USB and connects to your PCB with a 5-wire cable. Programming software includes Windows« GUI and command line capability. ISSP kit contains programmer, software, power supply, 5-wire programming cable, and USB cable.

 

Software Title	Description	Link
CY3207ISSP	Latest CY3207ISSP software

 

CY3218-CAPEXP2 Kit Contents:

• CY3218-CAPEXP2 CapSense Express Evaluation Board
• CY3240-I2USB Board
• USB Retractable Cable 
• Kit Installation CD (includes PSoC Programmer, .NET Framework 2.0, PSoC Express, CapSense Express Extension Pack, and CapSense Express Documentation)
• AAA Battery

The evaluation kit showcases the 16-Pin QFN CY8C201A0-LDX2I CapSense Express device providing the following interfaces: 

• 5 Segment CapSense Slider with Monitoring and Tuning for Sensitivity Adjustments
• 4 status LEDs
• 1 mechanical button
   

Software Title	Description	Link
PSoC Designer 5.0 SP6	This kit requires PSoC Designer 5.0 SP6
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: This kit requires the System Level functionality of PSoC Designer 5.0. This functionality does not exist in versions 5.1 or newer.

CY3218-CAPEXP1 Kit Contents:

• CY3218-CAPEXP1 CapSense Express Evaluation Board
• CY3240-I2USB Board
• USB Retractable Cable 
• Kit Installation CD (includes PSoC Programmer, .NET Framework 2.0, PSoC Express, CapSense Express Extension Pack, and CapSense Express Documentation)
• AAA Battery

The evaluation kit showcases the 16-Pin QFN CY8C20110-LDX2I CapSense Express device providing the following interfaces: 

• 3 CapSense buttons with Monitoring and Tuning for Sensitivity Adjustments
• 3 backlighting LEDs
• 3 status LEDs
• 1 mechanical button
   

CapSense Express is part of the PSoC Mixed-Signal Array Product line but individual CapSense Express device information needs to be accessed via the individual part number links in the line below titled Related Part Numbers.

Software Title	Description	Link
PSoC Designer 5.0 SP6	This kit requires PSoC Designer 5.0 SP6
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: This kit requires the System Level functionality of PSoC Designer 5.0. This functionality does not exist in versions 5.1 or newer.

• One PLC20Q Pod
• One Flex cable
• Two 48QFN Feet

 
Features:

• User friendly PLC Control Panel Application available on the kit CD
• Chip power supply derived from 110V to 240V AC
• On-chip powerline bridge application layer, powerline network protocol layer, and physical layer FSK modem
• LED status indicators for Power, Powerline Transmit and Receive, and Band in Use.
• Five-position DIP switches
  • Three DIP switches for manual powerline node logical address selection
  • One DIP switch to configure I2C slave address
  • One DIP switch to select between external crystal and oscillator
• On board surge protection and isolation circuit
• Integrated Powerline Modem PHY
   

Kit Contents:

• CY3272 Quick Start Guide
• One CY3272 PLC HV Evaluation Board
• CD containing:
  • Packet Test Software – PLC Control Panel Application
  • CY8CPLC10 Data Sheet
  • CY3272 Evaluation Board User Guide
  • Application Note – Using CY8CPLC10 in Powerline Communication (PLC) Applications
  • CY3272 Board Schematics
  • CY3272 Board Gerbers
• AC Power Cable
• USB-I2C Bridge
• Ribbon Cable for I2C communication, External Reset, and Powering External Board
• Retractable USB Cable
• Five CY8CPLC10-28PVXI Device Samples

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming
Powerline Communcation	PLC Contol Panel Application

Kit content:

• One PLC20 Pod
• One Flex cable
• Two 28SSOP Feet
• One 28 Pin Mask

• Chip power supply derived from 12V to 24V AC/DC
• On-chip powerline bridge application layer, powerline network protocol layer, and physical layer FSK modem
• LED status indicators for Power, Powerline Transmit and Receive, and Band in Use
• Five-position DIP switches
  • Three DIP switches for node logical address selection
  • One DIP switch to configure node I2C addressing mode
  • One DIP switch to select between the external crystal and oscillator
• Integrated Powerline Modem PHY
   

Kit Contents:

• CY3273 Quick Start Guide
• CY3273 PLC LV Evaluation Board
• CD containing:
  • CY8CPLC10 Data Sheet
  • Packet Test Software – PLC Control Panel Application
  • CY3273 Evaluation Board User Guide
  • Application Note – Using CY8CPLC10 in Powerline Communication (PLC) Applications
  • CY3273 Board Schematics
  • CY3273 Board Gerbers
• 12V Power Supply
• Cable to Create LV Daisy Chain
• USB-I2C Bridge
• Five Wire Ribbon Cable for I2C communication, External Reset, and Powering External Board
• Retractable USB Cable
• Five CY8CPLC10-28PVXI Device Samples

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming
Powerline Communcation	PLC Contol Panel Application

The CY3250-LED16P01NQ kit is obsolete as of July 6, 2011. In place of CY8CLED16P01 please consider using CY8CPLC20 device in your design and related POD kits. Links are provided below.

Please contact Cypress customer support if you have any questions. Call 1-800-541-4736 and select 8 or email us at customercare@cypress.com>

The CY3277 kit is obsolete as of June 22, 2011. If you are looking for a low voltage (12V – 24V AC/DC) Powerline Communication kit please see: CY3273 kit here: www.cypress.com/go/CY3273 and CY3275 kit here: www.cypress.com/go/CY3275

Please contact Cypress customer support if you have any questions. Call 1-800-541-4736 and select 8 or email us at customercare@cypress.com

The CY3276 kit is obsolete as of June 22, 2011. If you are looking for a high voltage (110V – 240V AC) Powerline Communication kit please see: CY3272 kit here: www.cypress.com/go/CY3272 and CY3274 kit here: www.cypress.com/go/CY3274

Please contact Cypress customer support if you have any questions. Call 1-800-541-4736 and select 8 or email us at customercare@cypress.com

Please contact Cypress customer support if you have any questions. Call 1-800-541-4736 and select 8 or email us at customercare@cypress.com

Please contact Cypress customer support if you have any questions. Call 1-800-541-4736 and select 8 or email us at customercare@cypress.com

Please contact Cypress customer support if you have any questions. Call 1-800-541-4736 and select 8 or email us at customercare@cypress.com

Designed for use with the CY8CKIT-001 PSoC Development Kit, CY8CKIT-030 PSoC 3 Development Kit and CY8CKIT-050 PSoC 5 Development Kit (sold separately). Explore PSoC LCD segment drive capabilities through this expansion board kit that features battery meter and stopwatch example projects on a 7- and 14-segment multi-function display.

Kit Contents:

• PSoC LCD Segment Drive Expansion Board
• Quick Start Guide
• Kit CD, which includes: PSoC Creator, PSoC Programmer, Projects and Documentation

For PSoC training, please visit http://www.cypress.com/go/training.

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: The installation file will install the sample projects onto your system

The code example turns ON all the LCD segments one by one with a delay of 1 sec and displays the text "P.A.S.S.E.D" at the end with the dots blinking. The whole test repeats itself again after 2 secs.

LCD_Test.zip

Cypress’s PSoC programmable system-on-chip architecture gives you the freedom to not only imagine revolutionary new products, but the capability to also get those products to market faster than anyone else.

Hardware Description

The kit contains:

• PT100 Class B Resistive Temperature Detector (RTD)
• Type K Thermocouple
• NTC Thermistor
• 2 Temperature Diodes (2N3904 transistors)
• DS600 IC temperature sensor
• Examples projects for temperature sensing measurement, combined temperature and voltage measurement and fan control
• Includes a bonus CY8CKIT-012 PSoC Prototyping and Development Expansion Board
• Quick Start Guide
• Resource CD 

For PSoC training, please visit http://www.cypress.com/go/training

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development

Kit Contents:

• PSoC 5 FirstTouch Board
• USB Cable
• 9V Battery
• Proximity Wire (for use as a Proximity Detection Antenna)
• Quick Start Guide Kit CD, which includes: PSoC Creator™, Kit Projects, and Documentation

For PSoC training, please visit  http://www.cypress.com/go/training .

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Note: The installation file will install the sample projects onto your system

 

Hardware Description:

The kit contains:

• PSoC 3 Precision Analog Voltmeter Demo Kit
• Quick Start Guide
• Kit CD, which includes: PSoC Creator, PSoC Programmer, Projects and Documentation

Software Title	Description	Link
PSoC Creator	This kit requires PSoC Creator for development
PSoC Programmer	This kit requires PSoC Programmer for programming

CY3280-BK1 Kit Contents:

• CY3280-20x34 Universal CapSense Controller Board
• CY3280-21x34 Universal CapSense Controller Board
• CY3280-SLM Universal CapSense Linear Slider Module
• CY3280-BBM Universal CapSense Prototyping Module
• CY3240-I2USB Board
• CY3210 MiniProg1 Programmer
• USB 2.0 Retractable Cable
• PSoC Express Installation CD
• PSoC Designer and PSoC Programmer Installation CD
• CY3280-BK1 Universal CapSense Controller Kit CD
• 1.5 mm and 3 mm Polycarbonate Overlays
   

Hardware Description

The CY3280-BK1 Universal CapSense Controller Kit is designed for easy prototyping and debug of CapSense designs with pre-defined control circuitry and plug-in hardware.  The kit comes with controller boards for the CY8C20x34 and CY8C21x34 PSoC devices as well as a breadboard module and a button(5) / slider module.

 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

 

ICE Debugging Support for Non-QFN CY8C21x23 PSoC Devices in a Prototype System or PCB

CY3250-21x23 Kit Contents:

• One (1) Non-QFN CY8C21x23 ICE Pod
• One (1) Flex Cable
• Two (2) 20-Pin SSOP Pod Feet

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 20-pin SSOP starter feet included but all other package feet sold separately.

ICE Debugging Support for Non-QFN CY8C21x34 PSoC Devices in a Prototype System or PCB

CY3250-21x34 Kit Contents:

• One (1) Non-QFN CY8C21x34 ICE Pod
• One (1) Flex Cable
• Two (2) 28-Pin SSOP Pod Feet

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Two (2) 28-pin SSOP feet included but all other package feet sold separately.

ICE Debugging Support for Non-QFN CY8C24x23A PSoC Devices in a Prototype System or PCB

CY3250-24x23A Kit Contents:

• One (1) Non-QFN CY8C24x23A ICE Pod
• One (1) Flex Cable
• Two (2) 28-Pin PDIP Pod Feet
• Two (2) 28-pin PDIP Pod Feet
• Two (2) CY8C24423A-24PXI (28-pin PDIP) samples

ICE Debugging Support for Non-QFN CY8C27xxx PSoC Devices in a Prototype System or PCB

CY3250-27xxx Kit Contents:

• One (1) Non-QFN CY8C27xxx ICE Pod
• One (1) Flex Cable
• Two (2) 28-Pin PDIP Pod Feet
• One (1) 28-pin Mask
• Two (2) CY8C27443-24PXI (28-pin PDIP) Samples

ICE Debugging Support for Non-QFN CY8C29xxx PSoC Devices in a Prototype System or PCB

CY3250-29xxx Kit Contents:

• One (1) Non-QFN CY8C29xxx ICE Pod
• One (1) Flex Cable
• Two (2) 28-Pin PDIP Pod Feet
• One (1) 28-pin Mask
• Two (2) CY8C29466-24PXI (28-pin PDIP) Samples

Replacement ICE Pod Feet (4) for Debugging 20-Pin PDIP PSoC Devices 

CY3250-20PDIP-FK Kit Contents:

• Four (4) 20-Pin PDIP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 20-Pin SOIC PSoC Devices

CY3250-20SOIC-FK Kit Contents:

• Four (4) 20-Pin SOIC ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 20-Pin SSOP PSoC Devices

CY3250-20SSOP-FK Kit Contents:
 

• Four (4) 20-Pin SSOP ICE Pod Feet

Replacement ICE Pods (2) for Debugging QFN CY8C21x34 PSoC Devices in a Prototype System or PCB

CY3250-21x34QFN-POD Kit Contents:

• Two (2) QFN CY8C21x34 ICE Pods

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Pod feet sold separately.

Replacement ICE Pod Feet (4) for Debugging 28-Pin PDIP PSoC Devices

CY3250-28PDIP-FK Kit Contents:

• Four (4) 28-Pin PDIP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 28-Pin SOIC PSoC Devices

CY3250-28SOIC-FK Kit Contents:

• Four (4) 28-Pin SOIC ICE Pod Feet

CY3210-29x66 Kit Contents:

• One (1) CY8C29x66 PSoC EvalPod

Replacement ICE Pod Feet (4) for Debugging 32-Pin QFN PSoC Devices

CY3250-32QFN-FK Kit Contents:

• Four (4) 32-Pin QFN ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 44-Pin TQFP PSoC Devices

CY3250-44TQFP-FK Kit Contents:
 

• Four (4) 44-Pin TQFP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 48-Pin QFN PSoC Devices

CY3250-48QFN-FK Kit Contents:

• Four (4) 48-Pin QFN ICE Pod Feet

Hardware Description
 

Replacement ICE Pod Feet (4) for Debugging 48-Pin SSOP PSoC Devices

CY3250-48SSOP-FK Kit Contents:

• Four (4) 48-Pin SSOP ICE Pod Feet

Replacement ICE Pod Feet (4) for Debugging 8-Pin PDIP PSoC Devices

CY3250-8PDIP-FK Kit Contents:

• Four (4) 8-Pin PDIP ICE Pod Feet

Hardware Description

CY3250-8PDIP-FK contains four (4) 8-pin PDIP ICE pod feet for debugging 8-pin PDIP PSoC devices with the CY3215-DK In-Circuit Emulator (ICE) and accessory CY3250-2xxxx ICE Pod Kits. CY3215-DK and CY3250-2xxxx kits sold separately.

Replacement ICE Pods (2) for Debugging Non-QFN CY8C21x23 PSoC Devices in a Prototype System or PCB

CY3250-21x23-POD Kit Contents:

• Two (2) Non-QFN CY8C21x23 ICE Pods

Hardware Description
 
The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Pod feet sold separately.

Replacement ICE Pods (2) for Debugging Non-QFN CY8C21x34 PSoC Devices in a Prototype System or PCB

CY3250-21x34-POD Kit Contents:

• Two (2) Non-QFN CY8C21x34 ICE Pods

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Pod feet sold separately.

Replacement ICE Pods (2) for Debugging Non-QFN CY8C29xxx PSoC Devices in a Prototype System or PCB

CY3250-29xxx-POD Kit Contents:
 

• Two (2) Non-QFN CY8C29xxx ICE Pods

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Replacement ICE Pod Feet (4) for Debugging 28-Pin SSOP PSoC Devices

CY3250-28SSOP-FK Kit Contents:

• Four (4) 28-pin SSOP ICE Pod Feet

Hardware Description

CY3250-28SSOP-FK contains four (4) 28-pin SSOP ICE pod feet for debugging 28-pin SSOP PSoC devices with the CY3215-DK In-Circuit Emulator (ICE) and accessory CY3250-2xxxx ICE Pod Kits. CY3215-DK and CY3250-2xxxx kits sold separately.
 

Software Title	Description	Link
PSoC Designer	This kit requires PSoC Designer for development
PSoC Programmer	This kit requires PSoC Programmer for programming

Replacement ICE Pods (2) for Debugging Non-QFN CY8C27xxx PSoC Devices in a Prototype System or PCB

CY3250-27xxx-POD Kit Contents:

• Two (2) Non-QFN CY8C27xxx ICE Pods

CY3210-24x94 Kit Contents:

• One (1) CY8C24x94 PSoC EvalPod

CY3210-20x34 Kit Contents:

• One (1) CY8C20x34 PSoC EvalPod

Overview:

PSoC EvalPods are 28-pin PDIP adapters that seamlessly connect any PSoC device to the 28-pin PDIP connector on any Cypress PSoC developer kit. CY3210-27x43 provides evaluation of the CY8C27x43 PSoC device family on any PSoC developer kit. PSoC developer kits sold separately.

CY3210-27x43 Kit Contents:

• One (1) CY8C27x43 PSoC EvalPod

Overview:

PSoC EvalPods are 28-pin PDIP adapters that seamlessly connect any PSoC device to the 28-pin PDIP connector on any Cypress PSoC developer kit. CY3210-24x23 provides evaluation of the CY8C24x23A PSoC device family on any PSoC developer kit. PSoC developer kits sold separately.

CY3210-24x23 Kit Contents:
 

• One (1) CY8C24x23 PSoC EvalPod

Overview:

PSoC EvalPods are 28-pin PDIP adapters that seamlessly connect any PSoC device to the 28-pin PDIP connector on any Cypress PSoC developer kit. CY3210-21x34 provides evaluation of the CY8C21x34 PSoC device family on any PSoC developer kit. PSoC developer kits sold separately.

CY3210-21x34 Kit Contents:
 

• One (1) CY8C21x34 PSoC EvalPod

CE Debugging Support for QFN CY8C21x23 PSoC Devices in a Prototype System or PCB

CY3250-21x23QFN Kit Contents:

• One (1) QFN CY8C21x23 ICE Pod
• One (1) Flex Cable
• Two (2) 24-Pin QFN Pod Feet

ICE Debugging Support for QFN CY8C27xxx PSoC Devices in a Prototype System or PCB

CY3250-27xxxQFN Kit Contents:

• One (1) QFN CY8C27xxx ICE Pod
• One (1) Flex Cable
• Two (2) 48-Pin QFN Pod Feet

ICE Debugging Support for QFN CY8C29xxx PSoC Devices in a Prototype System or PCB

CY3250-29xxxQFN Kit Contents:

• One (1) QFN CY8C29xxx ICE Pod
• One (1) Flex Cable
• Two (2) 48-Pin QFN Pod Feet

ICE Debugging Support for QFN CY8C24x23A PSoC Devices in a Prototype System or PCB

CY3250-24x23AQFN Kit Contents:
 

• One (1) QFN CY8C24x23A ICE Pod
• One (1) Flex Cable
• Two (2) 32-Pin QFN Pod Feet

Replacement ICE Pods (2) for Debugging QFN CY8C21x23 PSoC Devices in a Prototype System or PCB
 
CY3250-21x23QFN-POD Kit Contents:

• Two (2) QFN CY8C21x23 ICE Pods

Replacement In-Circuit Emulation (ICE) Pods for Debugging QFN CY8C23533 PSoC Devices

CY3250-23x33QFN-POD Kit Contents:

•  Two (2) QFN CY8C23533 ICE Pods

Replacement ICE Pods (2) for Debugging QFN CY8C24x23A PSoC Devices in a Prototype System or PCB

CY3250-24x23AQFN-POD Kit Contents:

• Two (2) QFN CY8C24x23A ICE Pods

Replacement ICE Pods (2) for Debugging QFN CY8C27xxx PSoC Devices in a Prototype System or PCB

CY3250-27xxxQFN-POD Kit Contents:

• Two (2) QFN CY8C27xxx ICE Pods

Replacement ICE Pods (2) for Debugging QFN CY8C29xxx PSoC Devices in a Prototype System or PCB

CY3250-29xxxQFN-POD Kit Contents:

• Two (2) QFN CY8C29xxx ICE Pods

ICE Debugging Support for QFN CY8C24x94 PSoC Devices in a Prototype System or PCB

CY3250-24x94QFN Kit Contents:
 

• One (1) QFN CY8C24x94 ICE Pod
• One (1) Flex Cable
• Two (2) 56-Pin QFN Pod Feet

Replacement ICE Pods (2) for Debugging QFN CY8C24x94 PSoC Devices in a Prototype System or PCB

CY3250-24x94QFN-POD Kit Contents:

• Two (2) QFN CY8C24x94 ICE Pods

This development kit is no longer available. This web page has been left in place for informational purposes only.

CY3210-SDCARD Rev. A Kit Contents:

• CY3210-PSoCEval1 Rev. B Board
• SD Card Adapter Board
• Secure Digital (SD) Memory Card
• USB to SD Card Reader
• MiniProg1
• USB Cable
• 12V Power Supply
• One CY8C29466-24PXI 28-pin DIP sample
• PSoC Designer(TM) and PSoC Programmer CD-ROM
• Cypress Support Card
• Example Projects

ICE Debugging Support for QFN CY8CLED02 EZ-Color HB LED Controllers in a Prototype System or PCB

CY3250-LED02QFN Kit Contents:

• One (1) QFN CY8CLED02 ICE Pod
• One (1) Flex Cable
• Two (2) 24-MLF Pod Feet
   

Hardware Description:

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target EZ-Color device in a prototype system or PCB via package-specific pod feet. Two (2) 24-MLF pod feet included.

ICE Debugging Support for QFN CY8CLED16 EZ-Color HB LED Controllers in a Prototype System or PCB

CY3250-LED02QFN Kit Contents:

• One (1) QFN CY8CLED16 ICE Pod
• One (1) Flex Cable
• Two (2) 48-QFN Pod Feet

Hardware Description:

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target EZ-Color device in a prototype system or PCB via package-specific pod feet. Two (2) 48-QFN pod feet included.

• One (1) QFN CY8CLED08 ICE Pod
• One (1) Flex Cable
• Two (2) 48-QFN Pod Feet

Hardware Description:

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target EZ-Color device in a prototype system or PCB via package-specific pod feet. Two (2) 48-QFN pod feet included.

ICE Debugging Support for QFN CY8CLED04 EZ-Color HB LED Controllers in a Prototype System or PCB

CY3250-LED04QFN Kit Contents:
 

• One (1) QFN CY8CLED04 ICE Pod
• One (1) Flex Cable
• Two (2) 68-QFN Pod Feet

Hardware Description:

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target EZ-Color device in a prototype system or PCB via package-specific pod feet. Two (2) 68-QFN pod feet included.

Kit Contents

• CY8C22345 Emulation Pod

Hardware Description

The CY3250-22345-POD emulation pod provides developers with a solution for debugging CY8C22345 and CY8C21345 projects. This kit provides only replacement pods for the specified PSoC family. The CY8C22345 and CY8C21345 devices are designed to provide a sufficient amount of memory and peripheral resources for use in CapSense™ applications, but are also capable of handling a wide range of applications found in the general-purpose microcontroller market.

Marketing Part Number

• CY3250-22345-POD

• CY8C22545 Emulation Pod

Hardware Description

The CY3250-22545-POD emulation pod kit provides developers with a solution for debugging CY8C22545 projects. This kit provides only replacement pods for the specified PSoC family. The CY8C22545 device is designed to provide a sufficient amount of memory and peripheral resources for use in CapSense™ applications, but are also capable of handling a wide range of applications found in the general-purpose microcontroller market.

Marketing Part Number

• CY3250-22545-POD

Overview:
Development Kit includes:
 

• Main Development Board
• Four Fan Modules
• Two Proto Modules
• MiniProg in-system Programmer
• Universal 110/220 Power supply & European Adapter
• PSoC Express CD-ROM
• USB 2.0 Cable
• Jumper Wire Kit
• Serial Cable
• Six 28-pin DIP samples, including:two CY8C24423A-24PXItwo CY8C27443-24PXItwo CY8C29466-24PXI
• Printed documentation

For complete development kit selection information, download the PSoC Development Tools selector guide, New PSoC Development Tools Selector Guide.

Hardware Description

Supports all active PSoC mixed-signal array families except CY8C42x23.

Overview

The “Segment LCD Driver” user module allows a designer to fully implement a LCD display solution in PSoC1 devices without using any external components. The user module comes with a GUI wizard using which the designer can create/modify:
 

1. LCD Specifications: Set the number of common and segment lines, set numeric and alphanumeric displays or add or remove digits from the display.
2. Segment-Common Mapping Table: Map segments and symbols to commons according to the LCD specification.
3. Pin Assignment: Assign the bias pin, common and segment lines to PSoC pins and set group size for displays.

• Direct drive 2.8V or 5V multiplexed LCD with ½ bias supported
• Types of display structures within the glass supported
  • 7 segment numerals
  • 14 segment alphanumeric
  • 16 segment alphanumeric
  • Special symbols
• 2, 3, and 4 common LCD drive
• LCD Drive technique using analog MUX bus
• Option of ½ bias to be generated externally or internally
• Supports Type A waveform only
• 30-150 Hz refresh rate
• Contrast Control

1. Application Note: Segment LCD Glass Drive Using PSoC® with CapSense® - AN56384
2. CY3280-28xxx Universal CapSense Controller Board
3. CY3280-22x45 Universal CapSense Controller Board
4. CY3280-24x94 Universal CapSense Controller Board
5. LCD & Capsense demo video
6. Devices Supported:
   1. CY8C20x34
   2. CY8C20xx6
   3. CY8C21x23
   4. CY8C21x34
   5. CY8C22x45
   6. CY8C21345
   7. CY8C23x33
   8. CY8C24x23
   9. CY8C24x94
   10. CY8C27x43
   11. CY8C28xxx
   12. CY8C29x66

• One (1) QFN CY8C24994 ICE Pod
• One (1) Flex Cable
• Two (2) 68-Pin QFN Pod Feet

CY3250-20434QFN-POD Kit Contents:
 

• Two (2) QFN CY8C20434 ICE Pods

Hardware Description

The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator via a flex cable and the target PSoC device in a prototype system or PCB via package-specific pod feet. Pod feet sold separately.

Overview:

PSoC EvalPods are 28-pin PDIP adapters that seamlessly connect any PSoC device to the 28-pin PDIP connector on any Cypress PSoC developer kit. CY3210-21x23 provides evaluation of the CY8C21x23 PSoC device family on any PSoC developer kit. PSoC developer kits sold separately.

CY3210-21x23 Kit Contents:
 

• One (1) CY8C21x23 PSoC EvalPod

ICE Debugging Support for QFN CY8C23x33 PSoC Devices in a Prototype System or PCB

CY3250-23x33QFN Kit Contents:
 

• One (1) QFN CY8C23533 ICE Pod
• One (1) Flex Cable
• Two 32-pin QFN Pod Feet

Please visit the Getting Started with PSoC 1 page which will guide you through your first steps. It provides basic information about software, technical documentation, training and support infrastructure.

Featuring

• High performance SAR ADC (10-bit with Sample & Hold)
• Dual Channel robust capacitive touch-sensing interfaces
• Enhanced PSoC digital and analog resources for CapSense Plus™
• Hardware Real-Time Clock
• Dual Hardware I2C with hardware address matching

Kit Contents:

• CY3280-28XXX Universal CapSense Controller Board
• CY3280-28XXX Universal CapSense Controller Board CD
• CY3240-I2CUSB Board
• CY3210-MiniProg1 Programmer
• PSoC Designer 5.0 SP6 CD

Hardware Description