Features

• XRES pin to support in-system serial programming (ISSP) and external reset control in CY8C24894
• Powerful Harvard-architecture processor
• Advanced peripherals (PSoC® Blocks)
• Full speed USB (12 Mbps)
• Flexible on-chip memory
• Programmable pin configurations
• Precision, programmable clocking
• Additional system resources
• For more, see pdf

PSoC Functional Overview

The PSoC family consists of many devices with on-chip controllers. These devices are designed to replace multiple traditional MCU-based system components with one low-cost single-chip programmable component. A PSoC device includes configurable blocks of analog and digital logic, and programmable interconnect. This architecture makes it possible for you to create customized peripheral configurations, to match the requirements of each individual application.

Features

• Easiest to use capacitive button controller
  • Four-button solution configurable through Hardware straps
  • No software tools or programming required
  • Four general-purpose outputs (GPOs)
  • GPOs linked to CapSense® buttons
  • GPOs support direct LED drive
• Robust noise performance
  • Specifically designed for superior noise immunity to external radiated and conducted noise
  • Low radiated noise emission
• SmartSense™ auto tuning
• For more, see pdf

Overview

The CY8CMBR2044 incorporates several innovative features to save time and money to quickly enable a capacitive touch sensing user interface in your design. It is a hardware configurable device and does not require any software tools or coding. This device is enabled with Cypress's revolutionary SmartSense™ Auto-Tuning algorithm. SmartSense™ Auto-Tuning ends the need to manually tune the user interface during development and production ramp. This speeds the time to volume and saves valuable engineering time, test time and production yield loss.

• Powerful Harvard-architecture processor
• Advanced peripherals (PSoC® blocks)
• Flexible on-chip memory
• Complete development tools
• Precision, programmable clocking
• Programmable pin configurations
• Versatile analog mux
• Additional system resources
• For more, see pdf

The PSoC family consists of many devices with on-chip controllers. These devices are designed to replace multiple traditional MCU-based system components with one low-cost single-chip programmable component. A PSoC device includes configurable blocks of analog and digital logic, and programmable interconnect. This architecture makes it possible for you to create customized peripheral configurations, to match the requirements of each individual application. Additionally, a fast central processing unit (CPU), flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.

Features

• Advanced CapSense block with SmartSense Auto-Tuning
• Driven shield
• Powerful Harvard-architecture processor
• Advanced peripherals (PSoC® blocks)
• Flexible on-chip memory
• Complete development tools
• Precision, programmable clocking
• Programmable pin configurations
• Versatile analog mux
• For more, see pdf.
   

PSoC Functional Overview

The PSoC family consists of many devices with on-chip controllers. These devices are designed to replace multiple traditional MCU-based system components with one low-cost single-chip programmable component. A PSoC device includes configurable blocks of analog and digital logic, and programmable interconnect.

• QuietZone™ Controller
• Low power CapSense® block with SmartSense™ auto-tuning
• Driven shield available on five GPIO pins
• Powerful Harvard-architecture processor
• Flexible on-chip memory
• Four clock sources
• Programmable pin configurations
• Versatile analog mux
• Additional system resources
• Complete development tools
• Sensor and Package options
• For more, see pdf

PSoC® Functional Overview

The PSoC family consists of many devices with on-chip controllers. These devices are designed to replace multiple traditional MCU-based system components with one low-cost single-chip programmable component. A PSoC device includes configurable blocks of analog and digital logic, and programmable interconnect. This architecture makes it possible for you to create customized peripheral configurations, to match the requirements of each individual application. Additionally, a fast central processing unit (CPU), flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.

Features

• Low power CapSense® block with SmartSense Auto-tuning
• Powerful Harvard-architecture processor
• Operating Range: 1.71 V to 5.5 V
• Operating Temperature range: -40 °C to +85 °C
• Flexible on-chip memory
• Four Clock Sources
• Programmable pin configurations
• Versatile Analog functions
• Full-Speed USB
• For more, see pdf

PSoC^® Functional Overview

The PSoC family consists of on-chip controller devices, which are designed to replace multiple traditional microcontroller unit (MCU)-based components with one, low cost single-chip programmable component. A PSoC device includes configurable analog and digital blocks, and programmable interconnect. This architecture allows the user to create customized peripheral configurations, to match the requirements of each individual application.  

Features

• Capacitive Slider and Button Input
• Target Applications
• Low Operating Current
• Industry's Best Configurability
• Advanced Features
• Wide Range of Operating Voltages
• I2C Communication
• Industrial Temperature Range: –40°C to 85°C.
• Available in 16-pin QFN and 16-pin SOIC Package
• For more, see pdf
   

Overview

These CapSense Express™ controllers support 4 to 10 capacitive sensing CapSense buttons. The device functionality is configured through an I2C port and can be stored in onboard nonvolatile memory for automatic loading at power on. The CapSense Express controller enables the control of 10 I/Os configurable as one capacitive sensing slider (10 segments)[1] or one slider (5 segments) with the rest of the pins as buttons or GPIOs (for driving LEDs or interrupt signals based on various button conditions).

Features

• 10/8/6/4 capacitive button input
• Target applications
• Low operating current
• Industry's best configurability
• Advanced features
• Wide range of operating voltages
• I2C communication
• Industrial temperature range: –40 °C to 85 °C.
• Available in 16-pin QFN, 8-pin, and 16-pin SOIC packages
• For more, see pdf

Overview

These CapSense Express™ controllers support four to ten capacitive sensing (CapSense) buttons. The device functionality is configured through an I2C port and can be stored in onboard nonvolatile memory for automatic loading at power-on. The CY8C20110 is optimized for dimming LEDs in 15 selectable duty cycles for back light applications. The device can be configured to have up to 10 GPIOs connected to the PWM output. The PWM duty cycle is programmable for variable LED intensities.

Features

• Easy to use capacitive button controller
• SmartSense™ Auto-Tuning
• Noise Immunity
• System Diagnostics of CapSense buttons - reports any faults at device power up
• Advanced features
• Wide operating voltage range
• Low power consumption
• Industrial temperature range: –40 °C to +85 °C
• 32-pin Quad Flat No leads (QFN) package (5 mm × 5 mm × 0.6 mm)
   

Overview

The CY8CMBR2010 incorporates several innovative features to save time and money to quickly enable a capacitive touch sensing user interface in your design. It is a hardware configurable device and does not require any software tools or coding. This device is enabled with Cypress’s revolutionary SmartSense™ Auto-Tuning algorithm. SmartSense™ Auto-Tuning ends the need to manually tune the user interface during development and production ramp. This speeds the time to volume and saves valuable engineering time, test time and production yield loss.

Features

• 1.71-V to 5.5-V operating range
• Low power CapSense® block
• Powerful Harvard-architecture processor
• Flexible on-chip memory
• Precision, programmable clocking
• Programmable pin configurations
• Integrates Immersion TS2000 Haptics technology for ERM drive control
• Versatile analog mux
• Additional system resources
• Complete development tools
• Package options
• For more, see pdf

PSoC® Functional Overview

The PSoC family consists of on-chip controller devices, which are designed to replace multiple traditional microcontroller unit (MCU)-based components with one, low-cost single-chip programmable component. A PSoC device includes configurable analog and digital blocks, and programmable interconnect. This architecture allows the user to create customized peripheral configurations, to match the requirements of each individual application. Additionally, a fast CPU, flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.

Features

• Hardware Configurable Matrix CapSense® Controller
  • Does not require software tools or programming
  • 16 buttons can be configured individually or as a matrix
  • Supports 3x4 and 4x4 matrix configurations
• Matrix Host Interface Communication
  • Industry standard host interface protocols reuse existing host processor firmware
    • Key Scan Interface
    • Truth Table Interface
  • Encoded GPO Interface - minimizes number of pins required
• For more, see pdf

Overview

The CY8CMBR2016 CapSense Express capacitive touch sensing controller incorporates several innovative features to save time and money to quickly enable a capacitive touch sensing user interface in your design. It is a hardware configurable device and does not require any software tools, firmware coding or device programming. This device is enabled with Cypress's revolutionary SmartSense™ auto-tuning algorithm.

Features

• Capacitive Button Input tied to a Configurable Output
• Target Applications
• Industry's Best Configurability
• Advanced Features
• Wide Range of Operating Voltages
• I2C Communication
• Industrial Temperature Range: –40°C to 85°C
• Available in 8-Pin SOIC Package
• For more, see pdf

Overview

The CapSense® Express™ controllers support two capacitive sensing (CapSense) buttons and two general purpose outputs in CY8C20121 and one CapSense button and one general purpose output in CY8C20111. The device functionality is configured through the I2C port and can be stored in on-board nonvolatile memory for automatic loading at power on. The digital outputs are controlled from CapSense inputs in factory default settings, but are user configurable for direct control through I2C.

• Up to 10 CapSense buttons with direct LED drive capability
• 1.71V to 5.5V Operating Range Voltage
• 15uA per button in run mode
• 100nA, Deep Sleep mode
• Patented CSD technology for robust immunity to conducted and radiated noise
• Robust noise-immunity to RF, LCD driver and AC Line Noise
• SmartSense® Auto-tuning – eliminates the tuning process and compensates for environmental changes during runtime
• Small footprint package: 32-pad QFN (5 x 5 x 0.6 mm)
• EZClick™ software tool for easy configuration of advanced features

Features

• Low Power CapSense® Block

  • Configurable Capacitive Sensing Elements
  • Supports Combination of CapSense Buttons, Sliders, Touchpads, and Proximity Sensors
• Powerful Harvard Architecture Processor
  • M8C Processor Speeds up to 12 MHz
  • Low power at high speed
  • Operating Voltage: 2.4 V to 5.25 V
  • Industrial Temperature Range: -40°C to 85°C
• Flexible On-Chip Memory
  • 8K Bytes Flash Program Storage 50,000 Erase/Write Cycles
  • 512 Bytes SRAM Data Storage
  • Partial Flash Updates
  • Flexible Protection Modes
  • Interrupt Controller
  • In-System Serial Programming (ISSP)
  • For more, see pdf.

PSoC® Functional Overview

The PSoC family consists of many Programmable System-on-Chips with On-Chip Controller devices. These devices are designed to replace multiple traditional MCU based system components with one low cost single chip programmable component. A PSoC device includes configurable analog and digital blocks and programmable interconnect.

Features

• Low power CapSense® block
• AEC qualified
• Powerful Harvard architecture processor
• Flexible on-chip memory
• Complete development tools
• Precision, programmable clocking
• Programmable pin configurations
• Versatile analog mux
• Additional system resources
   

PSoC® Functional Overview

The PSoC family consists of many Programmable System-on-Chip with on-chip controller devices. These devices are designed to replace multiple traditional microcontroller unit (MCU)-based system components with one low cost single chip programmable component. A PSoC device includes configurable analog and digital blocks and programmable interconnect. This architecture enables the user to create customized peripheral configurations to match the requirements of each individual application.

• Automotive Electronics Council (AEC) Q100 qualified
• Operating Range: 1.71 V to 5.5 V
• Low power CapSense® block
• Powerful Harvard-architecture processor
• Flexible on-chip memory
• Precision, programmable clocking
• Programmable pin configurations
• Versatile analog mux
• Additional system resources
   

PSoC® Functional Overview

The PSoC family consists of on-chip controller devices, which are designed to replace multiple traditional microcontroller unit (MCU)-based components with one, low cost single-chip programmable component. A PSoC device includes configurable analog and digital blocks, and programmable interconnect. This architecture allows the user to create customized peripheral configurations, to match the requirements of each individual application. Additionally, a fast CPU, Flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.