You are here

Experience Cypress's Breakthrough USB 3.0, USB-Serial and Ultra-Low-Power Wireless Solutions at Computex | Cypress Semiconductor

Experience Cypress's Breakthrough USB 3.0, USB-Serial and Ultra-Low-Power Wireless Solutions at Computex


 

Experience our latest innovations in:

 

EZ-USB® HX3™ USB 3.0 Hub Controller: USB-IF Certified 4-PortHub Controller

EZ-USB® HX3™: USB-IF Certified 4-Port USB 3.0 Hub Controller

 

  • Supports Battery Charging v1.2 and Apple Charging
  • Provides upstream charging of USB-OTG portable device with ACA-Dock
  • Improves signal quality with configurable USB PHY

EZ-USB CX3™: MIPI CSI-2 to USB 3.0 Bridge

 

  • Adds USB 3.0 connectivity to any MIPI CSI-2-compliant image sensor
  • Provides four CSI-2 data lanes with speed up to 1 Gbps per lane
  • Supports uncompressed video up to 1080p at 30 fps or 720p at 60 fp
  • Supports image formats RAW8/10/12/14, YUV422 and RGB888/666/565

EZ-USB FX3™: Programmable USB 3.0 Controller

 

  • Adds USB 3.0 connectivity to any system via GPIF™ I
  • Interfaces with any MPU, MCU, ASIC, image sensor, or FPGA
  • Provides an ARM9 core with 512 kB RAM for data processing
  • Provides 400 MBps throughput for uncompressed HD video transfer

USB-Serial Bridge Controllers: Industry’s First Configurable Dual-Channel Bridges

 

  • Bridge two configurable serial (UART, I2C or SPI) channels over USB
  • Supports BC v1.2-compliant Battery Charger Detection (BCD)
  • Integrated CapSense® supports up to eight touch-sensing buttons
  • Industry’s lowest standby power consumption of 5 μA

WUSB-NX: Ultra-Low-Power, Proprietary 2.4 GHz Transceiver

 

  • Supports up to 2 Mbps data rate
  • Up to three-year battery life with ultra-low sleep (900 nA) and idle (26 μA) current
  • Interfaces with any microcontroller using standard 4-wire SPI
  • Complete system solution with Cypress’s enCoRe™ and PSoC® families

See us in the USB-IF Booth #N0608 at Computex!