You are here

L3 EICU sample project | Cypress Semiconductor

L3 EICU sample project

Last Updated: 
Jun 21, 2016
Version: 
1

The application will send a 1 byte message with extended ID and captures the message using the EICU. The application uses the CAN0 on the MCU with a bitrate of 100 kBit/s. If the user pushes the SW1 button the transmit data will be send again, pushing SW2 button the transmit data will be increased
and send again. If the user pushes the SW3 button the data will be decremented
and send again. The output pattern is somehow aligned to CAN frame structure
but will not always fit exactly due to timing and stuffing

This content contains information on Cypress products that have been migrated from Spansion's website in conjunction with our merger. Although marked with the name of the company that developed the material (Spansion or Fujitsu), Cypress continues to offer the content to our customers. There is no change to this information as a result of this migration. Future revisions will occur when appropriate, and changes will be noted in the revision history.