You are here

CCG2 60W Car Charger Reference Design using Southchip | Cypress Semiconductor

CCG2 60W Car Charger Reference Design using Southchip

Last Updated: 
Mar 08, 2017

The CCG2 60W Car Charger Reference Design Board is a receptacle based USB-C Charger with USB PD 2.0 support. In the PD mode, it supports 5V@3A, 9V@3A, 12V@3A, 15V@3A and 20V@3A output.  The board can be programmed to support any output voltage between 0 to 20V. It is designed to work with standard Car Lighter Attachment (CLA). It works with any DC input between 2.7V to 30V.

The two major components on the board are Cypress’s EZ-PD CCG2 (CYPD2134-24LQXIT) controller and Southchip’s SC8701 DC-DC Buck-Boost controller. 

The CCG2 device handles USB Type-C interface and Power Delivery (PD) 2.0  The buck-boost conversion, Over Current Protection (OCP) and Over Voltage Protection (OVP) are handled by Southchip's SC8701 DC-DC Buck-Boost controller. The board hardware design files (schematic,  layout etc) and firwmware are readily available below for customers to reduce the design cycle.

For any questions regarding the reference design, please contact Online Tech Support Case System.