You are here

S6SAE100A00VA1001: Evaluation Board of S6AE101A, S6AE102A and S6AE103A Ultra Low Power Energy Harvesting PMIC for Indoor Light | Cypress Semiconductor

S6SAE100A00VA1001: Evaluation Board of S6AE101A, S6AE102A and S6AE103A Ultra Low Power Energy Harvesting PMIC for Indoor Light

Last Updated: 
Jan 08, 2017

S6SAE100A00VA1001: Evaluation Board of S6AE101A, S6AE102A and S6AE103A Ultra Low Power Energy Harvesting PMIC for Indoor Light

 

The S6SAE100A00VA1001 is the tiny evaluation board for the ultra-low-power energy harvesting PMIC for indoor type solar cell, S6AE100A series. This evaluation board consists of three independent boards for S6SAE101A, S6SAE102A and S6SAE103A. This board is capable of supporting life extension of primary battery or becoming battery-less solution, and it is for evaluation of diverse power management functions used for wireless sensor network. 

 

Evaluation Board Specification:

Parameter Symbol Condition Min. Typ. Max. Unit
Power supply voltage 1*1 VVDD VDD1,2,3 pin 3.4*3 - 5.5 V
Power supply voltage 2 VVBA VBAT1 pin (S6AE101A) 3.4*3 - 5.5 V
VBAT2,3 pin (S6AE102A, S6AE103A) 2.0 - 5.5 V
Output voltage 1 VVOUTH Rx1=6.8 Mohm, Rx2=2.7 Mohm, Rx3=9.1Mohm - 3.29 - V
Output voltage 2 VVOUTL Rx1=6.8 Mohm, Rx2=2.7 Mohm, Rx3=9.1Mohm - 2.53 - V
OVP detection voltage VOVPH VDD pin*2 5.2 5.4 5.5 V
OVP release voltage VOVPL 5.1 5.3 5.4 V
OVP detection hysteresis VOVPHYS - 0.1 - V
OVP protection current IOVP VDD pin*2 input current 6 - - mA

Board size: 19 mm × 11 mm for S6AE101A, 20.5 mm × 16 mm for S6AE102A, 23 mm × 16 mm for S6AE103A. 
 

*1 It is recommended to connect more than six cells in series when solar cells are used.

*2 IC (U1,U2,U3) pin  

*3 Min. value of power supply voltage depends on the output voltage setting

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.