PSoC® 6 WiFi-BT Pioneer Kit | Cypress Semiconductor
PSoC® 6 WiFi-BT Pioneer Kit
The PSoC® 6 WiFi-BT Pioneer Kit (CY8CKIT-062-WiFi-BT) is a low-cost hardware platform that enables design and debug of the PSoC 62 MCU and the Murata LBEE5KL1DX Module (CYW4343W WiFi + Bluetooth Combo Chip).
Featuring the PSoC 62 Line
The PSoC 6 WiFi-BT Pioneer Kit features the PSoC 62 MCU: a single- or dual-core MCU, with an Arm® Cortex®-M4 and Arm® Cortex®-M0+, 1MB of Flash, 288KB of SRAM,
104 GPIO, 7 programmable analog blocks, 56 programmable digital blocks, Full-Speed USB, a serial memory interface, a PDM-PCM digital microphone interface, and industry-leading capacitive-sensing with CapSense™.
TFT Display Shield Board
The PSoC 6 WiFi-BT Pioneer Kit also comes with a TFT display shield board. This shield board contains a
2.4" TFT display, a light sensor, a 6-axis motion sensor, and a digital microphone.
EZ-PD™ CCG3 Type-C Power Delivery
The PSoC 6 WiFi-BT Pioneer Kit base board includes a Cypress EZ-PD CCG3 power delivery system. It comes preprogrammed and can deliver power from a Type-C port to an on-board header while simultaneously charging a 3.7-V lithium-ion polymer battery. In addition, the power delivery system can provide power to a Type-C peripheral such as a cell phone with power derived from an external source.
The PSoC 6 WiFi-BT Pioneer Kit baseboard comes with 2 buttons, a 5-segment slider, and a proximity sensor. Using the 4th generation CapSense provided in the PSoC 62 Line, self- and mutual-capacitive-sensing systems can be evaluated with this kit.
Murata LBEE5KL1DX Module (CYW4343W WiFi + BT Combo Chip)
The PSoC 6 WiFi-BT Pioneer Kit features the Murata LBEE5KL1DX module, that provides IEEE 802.11a/b/g/n WLAN + Bluetooth, best-in-class power consumption, and enables small form factors for IoT devices
PSoC Creator and WICED Studio IDE Support
PSoC Creator and WICED Studio are required to develop and design with the PSoC 6 WiFi-BT Pioneer Kit. PSoC Creator 4.2 or later is used to design standalone PSoC 6 MCU projects and WICED Studio 6.1 or later is used
to design PSoC 6 + WiFi/BT projects. To find out more about how to use each IDE with the kit, please refer to the User's Guide below in the "Related Files" section.