You are here

FM4-176L-S6E2CC-ETH - ARM® Cortex®-M4 MCU Starter Kit with Ethernet and USB Host | Cypress Semiconductor

FM4-176L-S6E2CC-ETH - ARM® Cortex®-M4 MCU Starter Kit with Ethernet and USB Host

Last Updated: 
Jul 28, 2016

 

The ARM® Cortex®-M4 MCU Starter Kit with Ethernet, USB and audio is a low-cost development platform for the Cypress 200MHz FM4 S6E2C-Series of ARM® Cortex MCUs. The development kit enables rapid development of high-performance embedded systems using the Arduino Uno-compatible interface to connect Arduino shields for low-cost hardware expansion.

Featuring ARM® Cortex-M4 FM4 S6E2C-Series MCU

  • 200MHz ARM® Cortex MCU with DMA
  • 675 CoreMark® MCU
  • Single precision IEEE 754 compliant floating point unit
  • 2MB flash, 256KB SRAM and 190 GPIOs.
  • Communication interfaces: 10/100 Ethernet (IEEE 802.3),  USB host, USB device, CAN, LIN, High-Speed Quad SPI, I2S, I2C and UART.

Featuring Arduino Uno Footprint with Onboard Sensors and CMSIS-DAP Interface

  • Arduino™ Uno compatible footprint
  • Onboard sensors: Accelerometer and Photo Transistor 
  • External peripherals: Stereo codec, SRAM, Serial flash and multi-color LEDs 
  • CMSIS-DAP interface: Programming and debugging of the S6E2CC MCU

Kit Contents:

  • FM4 S6E2C-Series Board
  • USB Standard-A to Micro-B cable
  • Quick Start Guide