CY4701 EZ-USB® GX3™ Reference Design Guide | Cypress Semiconductor
CY4701 EZ-USB® GX3™ Reference Design Guide
The CY4701 EZ-USB® GX3™ Reference Design Kit (RDK) is intended for use as a development platform for hardware or software in a laboratory environment. The board is an open system design, which does not include a shielded enclosure. This kit may cause interference with other electrical or electronic devices in close proximity. In a domestic environment, this product may cause radio interference. In such cases, take adequate preventive measures. Also, do not use this board near any medical equipment or RF devices.
This Type-A to Gigabit Ethernet dongle reference design showcases the unique features of CYUSB3610 (GX3), Cypress's SuperSpeed USB to Gigabit Ethernet Bridge Controller. The GX3 enumerates as a standard network adapter on the PC, and works with existing software applications. The Type-A dongle is plug-and-play, requiring no other hardware or USB cable for its operation.
This dongle is also available with a USB Type-C connector. For more information on the USB Type-C to Gigabit Ethernet dongle, please visit the Type-C dongle page.
For more information on Cypress's USB Type-C products, please visit www.cypress.com/type-c.
- Fully functional USB 3.0 to Gigabit Ethernet dongle
- LEDs for USB 3.0 and Ethernet activity
- USB bus-powered operation
- Gigabit Ethernet functionality supporting Energy Efficient Ethernet and WLAN (Wake on LAN)
- GX3 USB 3.0 to GigE dongle
- Quick start guide