You are here

S25FL256L 256 Mbit, S25FL128L 128 Mbit SPI Flash Memory | Cypress Semiconductor

S25FL256L 256 Mbit, S25FL128L 128 Mbit SPI Flash Memory

Last Updated: 
Feb 02, 2017

The Cypress FL-L Family devices are Flash non-volatile memory products using Floating Gate technology and 65 nm process lithography. The FL-L family connects to a host system via a Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output, Single I/O is supported as well as optional two bit Dual I/O and four bit wide eight bit wide Quad I/O and Quad Peripheral Interface commands. In addition, there are Double Data Rate read commands for Quad I/O and QPI that transfer address and read data on both edges of the clock. The architecture features a Page Programming Buffer that allows up to 256-bytes to be programmed in one operation and provides individual 4KB sector, 32KB half block, 64KB block, or entire chip erase.

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.