You are here

CYBLE-224116-01, EZ-BLE™ PSoC® XT/XR BT 4.2 Module | Cypress Semiconductor

CYBLE-224116-01, EZ-BLE™ PSoC® XT/XR BT 4.2 Module

Last Updated: 
Dec 05, 2016
Version: 
*A

The Cypress CYBLE-224116-01 is a fully certified and qualified module supporting Bluetooth Low Energy (BLE) 4.2 wireless communication. The CYBLE-224116-00 is a turnkey solution that includes onboard power amplifier (PA), low noise amplifier (LNA), crystal oscillators, chip antenna, passive components, and the Cypress PSoC® 4 BLE.

The EZ-BLE PSoC® XT/XR BT 4.2 module provides extended industrial temperature operation (XT) as well as extended communication range (XR). The EZ-BLE XT/XR module is a scalable and reconfigurable platform architecture, combining programmable and reconfigurable analog and digital blocks with flexible automatic routing. The CYBLE-224116-00 also includes digital programmable logic, high-performance analog-to-digital conversion (ADC), opamps with comparator mode, and standard communication and timing peripherals.

The CYBLE-224116-01 includes a royalty-free BLE stack compatible with Bluetooth 4.2 and provides up to 25 GPIOs in a small 9.5 × 15.4 × 1.80 mm footprint. The CYBLE-224116-01 is a complete solution and an ideal fit for applications seeking a highly integrated BLE 4.2 wireless solution.

The CYBLE-224116-01 is drop-in compatible with the CYBLE-224110-00 module.

Module Description

  • Module size: 9.5 mm × 15.4 mm × 1.80 mm (with shield)
  • Extended Range: Up to 400 meters line-of-sight
  • Extended industrial temperature range: –40 °C to +105 °C
  • Up to 25 GPIOs
  • 256-KB flash memory, 32-KB SRAM memory
  • Bluetooth 4.2 qualified single-mode module
  • Certified to FCC, CE, MIC, KC, and IC regulations
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • Programmable analog
    • 4 x Opamps
    • 1 x 12-bit, 1-Msps SAR ADC
    • 1 x Low-Power Comparators
  • 1 x Cypress CapSense™ touch controller with SmartSense™ Auto-Tuning
  • Programmable digital
    • 4 x universal digital blocks
    • 4 x 16-bit configurable Timer/Counter/PWM blocks
    • 2 x configurable serial communication blocks
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for Programming
  • Certified to FCC, CE, MIC, KC, and IC regulations. Refer to KBA213260 for RF certification test reports.
  • Bluetooth SIG 4.2 qualified
  • CYBLE-224116-EVAL EZ-BLE™ PRoC™ BT 4.2 XT/XR Evaluation Board to evaluate and develop applications on the EZ-BLE PSoC Module