You are here

CYBLE-212019-00, CYBLE-212023-10: EZ-BLE™ PROC™ Module | Cypress Semiconductor

CYBLE-212019-00, CYBLE-212023-10: EZ-BLE™ PROC™ Module

Last Updated: 
Oct 18, 2016

The CYBLE-2120XX-X0 is a turnkey Bluetooth‚ Low Energy (BLE) wireless module solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PRoC™ BLE 256KB chip. The CYBLE-212019-00 includes FCC/IC/KC/MIC/CE RF certification and Bluetooth SIG qualification. The CYBLE-212023-10 module does not have a metal shield and does not include RF certifications or Bluetooth SIG qualification. The CYBLE-2120XX-X0 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-2120XX-X0 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-2120XX-X0 is drop-in compatible with the CYBLE-01201X-X0. The CYBLE-2120XX-X0 is targeted at applications requiring large memory size and cost-optimized BLE wireless connectivity.

Module Description

  • Module size: 14.52 mm ×19.20 mm × 2.00 mm (with shield)
  • Castelated solder pad connections for ease-of-use
  • 256-KB flash memory, 32-KB SRAM memory
  • Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog,HI-Z digital, or strong output
  • Bluetooth 4.1 single-mode module
  • Certified to FCC, IC, MIC, KC, and CE regulations
  • Industrial temperature range: –40 °C to +85 °C
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for programming
  • Certified to FCC, CE MIC, KC, and IC regulations.  Refer to KBA210638 for RF certification test reports.
  • Bluetooth SIG 4.1 qualified (CYBLE-212019-00 only)
  • CYBLE-212019-EVAL EZ-BLE™ PRoC™ Evaluation Board to evaluate and develop applications on the EZ-BLE PRoC Module