You are here

CYBLE-014008-00, EZ-BLE™ PSoC® Module | Cypress Semiconductor

CYBLE-014008-00, EZ-BLE™ PSoC® Module

Last Updated: 
Dec 05, 2016
Version: 
*H

EZ-BLE PSoC® Module

General Description

The Cypress CYBLE-014008-00 is a fully certified and qualified module supporting Bluetooth® Low Energy (BLE) wireless communication. The CYBLE-014008-00 is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive components, and Cypress PSoC® BLE. The CYBLE-014008-00 offers maximum system integration with the intelligent analog and programmable digital resources available on this module. In addition, the CYBLE-014008-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture.

Module Description

  • Module size: 11.0 mm × 11.0 mm × 1.80 mm (with shield)
  • Bluetooth 4.1 single-mode module
  • Industrial temperature range: –40 °C to +85 °C
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • 128-KB flash memory
  • 16-KB SRAM memory
  • Programmable analog
    • 4 x Opamps
    • 1 x 12-bit, 1-Msps SAR ADC
    • 1 x Low-Power Comparators
    • 1 x Cypress CapSense™ touch controller with SmartSense™ Auto-Tuning
  • Programmable digital
    • 4 x universal digital blocks
    • 4 x 16-bit configurable Timer/Counter/PWM blocks
    • 2 x configurable serial communication blocks
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for Programming
  • Up to 25 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
  • Certified to FCC, CE MIC, KC, and IC regulations. Refer to KBA210574 for RF certification test reports.
  • Bluetooth SIG 4.1 qualified
  • CYBLE-014008-EVAL EZ-BLE™ PSoC Evaluation Board to evaluate and develop applications on the EZ-BLE PSoC Module