You are here

CYBLE-012011-00/CYBLE-012012-10,EZ-BLE™ PRoC™ Module | Cypress Semiconductor

CYBLE-012011-00/CYBLE-012012-10,EZ-BLE™ PRoC™ Module

Last Updated: 
Oct 20, 2016

The CYBLE-01201x-x0 is a turnkey Bluetooth‚ Low Energy (BLE) wireless module solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PRoC™ BLE.  The CYBLE-012011-00 includes FCC/IC/KC/MIC/CE RF certification and Bluetooth SIG qualification.  The CYBLE-012012-10 module does not include RF certifications or Bluetooth SIG qualification. 

The CYBLE-01201x-x0 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-01201x-x0 includes 128KB of Flash and 16KB of SRAM.

The CYBLE-01201x-x0 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-012011-00 is qualified with Bluetooth SIG, and is certified for RF compliance with FCC, IC, CE, MIC, and KC regulatory agencies.

Module Description

  • Module size: 14.52 mm × 19.20 mm × 2.00 mm (with shield)
  • Bluetooth 4.1 single-mode module
  • Industrial temperature range: –40 °C to +85 °C
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • 128-KB flash memory
  • 16-KB SRAM memory
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for programming
  • Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
  • Certified to FCC, CE MIC, KC, and IC regulations (CYBLE-012011-00 only). Refer to KBA210638 for RF certification test reports.
  • Bluetooth SIG 4.1 qualified (CYBLE-012011-00 only)
  • CYBLE-012011-EVAL EZ-BLE™ PRoC™ Evaluation Board to evaluate and develop applications on the EZ-BLE PRoC Module