You are here

CY8C9520A, CY8C9540A, CY8C9560A: 20-, 40-, and 60-Bit I/O Expander with EEPROM | Cypress Semiconductor

CY8C9520A, CY8C9540A, CY8C9560A: 20-, 40-, and 60-Bit I/O Expander with EEPROM

Last Updated: 
Nov 28, 2017
Version: 
*I
The CY8C95xxA is a multi-port I/O expander with on board user available EEPROM and several PWM outputs.

20-, 40-, and 60-Bit I/O Expander with EEPROM

Features

  • I2C interface logic electrically compatible with SMBus
  • Up to 20 (CY8C9520A), 40 (CY8C9540A), or 60 (CY8C9560A) I/O data pins independently configurable as inputs, outputs, Bi-directional input/outputs, or PWM outputs
  • 4/8/16 PWM sources with 8-bit resolution
  • Extendable soft addressing algorithm allowing flexible I2C address configuration
  • Internal 3-/11-/27-Kbyte EEPROM
  • User default storage, I/O port settings in internal EEPROM
  • Optional EEPROM write disable (WD) input
  • Interrupt output indicates input pin level changes and pulse width modulator (PWM) state changes
  • Internal power on reset (POR)
  • Internal configurable watchdog timer

Overview

The CY8C95xxA operates as two I2C slave devices. The first device is a multi port I/O expander (single I2C address to access all ports through registers). The second device is a serial EEPROM. Dedicated configuration registers can be used to disable the EEPROM. The EEPROM uses 2-byte addressing to support the 28 Kbyte EEPROM address space. The selected device is defined by the most significant bits of the I2C address or by specific register addressing.

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.