You are here

CY7C68003: MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver | Cypress Semiconductor

CY7C68003: MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver

Last Updated: 
Jun 22, 2017

MoBL-USB™ TX2UL USB 2.0 ULPI Transceiver


The Cypress MoBL-USB™ TX2UL is a low voltage high speed (HS) USB 2.0 UTMI+ Low Pin Interface (ULPI) Transceiver. The TX2UL is specifically designed for mobile handset applications by offering tiny package options and low power consumption.

  • USB 2.0 Full Speed and High Speed Compliant Transceiver
  • Multi Range (1.8V to 3.3V) I/O Voltages
  • Fully Compliant ULPI Link Interface
  • 8-bit SDR ULPI Data Path
  • UTMI Level 0 Support
  • Support USB Device Mode only
  • Integrated Oscillator
  • Integrated Phase Locked Loop (PLL) – 13, 19.2, 24, or 26 MHz Reference
  • Integrated USB Pull Up and Termination Resistors
  • For more, see pdf

Functional Overview

UTMI+ Low Pin Interface (ULPI)

This block conforms to the ULPI specification. It supports the 8-bit wide SDR data path. The primary I/Os of this block support multi-range LVCMOS signaling from 1.8 V to 3.3 V (±5%). The level used is automatically selected by the voltage applied to VCCIO and is set at any voltage between 1.8 V and 3.3 V.