You are here

CY7C68001: EZ-USB SX2™ High Speed USB Interface Device | Cypress Semiconductor

CY7C68001: EZ-USB SX2™ High Speed USB Interface Device

Last Updated: 
Jun 01, 2017
Version: 
*S

EZ-USB SX2™ High Speed USB Interface Device

Features

  • USB 2.0-Certified Compliant
    • Test ID number 40000713 on USB-Implementor’s Form (USB-IF) integrators list
  • Operates at High (480 Mbps) or full (12 Mbps) Speed
  • Supports Control Endpoint 0:
    • Used for handling USB device requests
  • Supports four Configurable Endpoints that share a 4-KB FIFO Space
    • Endpoints 2, 4, 6, 8 for application-specific control and data
  • Standard 8- or 16-bit external master interface
    • Glueless interface to most standard microprocessors DSPs, ASICs, and FPGAs
  • For more, see pdf

Introduction

The EZ-USB SX2™ USB interface device is designed to work with any external master, such as standard microprocessors, DSPs, ASICs, and FPGAs to enable USB 2.0 support for any peripheral design. SX2 has a built-in USB transceiver and serial interface engine (SIE), along with a command decoder to send and receive USB data. The controller has four endpoints that share a 4-KB FIFO space for maximum flexibility and throughput, and Control Endpoint 0. SX2 has three address pins and a selectable 8- or 16- bit data bus for command and data input or output.