You are here

PSoC 4 Serial Communication Block (SCB) | Cypress Semiconductor

PSoC 4 Serial Communication Block (SCB)

Last Updated: 
Sep 26, 2016
Features Symbol Diagram
  • Industry-standard NXP® I2C bus interface
  • Standard SPI Master and Slave interfaces with Motorola, Texas Instruments, and the National Semiconductor's Microwire protocols
  • Standard UART TX and RX interfaces with SmartCard reader and IrDA protocols
  • EZ I2C mode which emulates a common I2C EEPROM interface
  • Supports wakeup from Deep Sleep mode
  • Run-time reconfigurable
  • I2C Bootloader support

General Description

The PSoC 4 SCB component is a multifunction hardware block that implements the following communication components: I2C, SPI, UART, and EZI2C. Each is available as a pre-configured schematic macro in the PSoC Creator Component Catalog, labeled with “SCB Mode.”

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.