You are here

AN91162 - Creating a BLE Custom Profile | Cypress Semiconductor

AN91162 - Creating a BLE Custom Profile

Last Updated: 
Jul 17, 2017
Version: 
*D

AN91162 describes the methodology for developing a Bluetooth® Low Energy (BLE) application with PSoC 4 BLE or PRoC BLE devices using a custom BLE profile. It provides an overview of custom profiles and services and the procedure to build an application with PSoC 4 BLE using RGB LED control as an example. This application note also applies to the PRoC BLE part.

This application note describes the methodology for developing a Bluetooth® Low Energy (BLE) application with PSoC 4 BLE or PRoC BLE devices using a custom BLE profile.

Introduction

Bluetooth Low Energy (BLE) is an ultra-low-power wireless standard introduced by the Bluetooth Special Interest Group (SIG) for short-range communication. The BLE physical layer, protocol stack, and profile architecture are designed and optimized to minimize power consumption. Similar to Classic Bluetooth, BLE operates in the 2.4-GHz ISM band but with a lower bandwidth of 1 Mbps.

Project Device PSoC Creator
Version
Development Kit CY8CKIT-xxx Compiler
Architecture Silicon
Revision
V3.3 or
Higher
V3.2 or
Lower
042 BLE
DVK
001
DVK
Keil GCC MDK RVDS
AN91162.zip PSoC 4 BLE Beta YES NO YES NO NO YES YES NO

 

See our 100 Projects in 100 days with PSoC 4 BLE blog for more examples.
Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.