You are here

AN68403 - PSoC® 3 and PSoC 5LP Analog Signal Chain Calibration | Cypress Semiconductor

AN68403 - PSoC® 3 and PSoC 5LP Analog Signal Chain Calibration

Last Updated: 
Apr 27, 2017
Version: 
*G

AN68403 explains how to calibrate an analog signal chain by using a calibrated Delta Sigma ADC and an on-chip EEPROM that are available in PSoC® 3 and PSoC 5LP. An example of a programmable gain amplifier as part of the analog signal chain is also described. AN68403 shows how gain and offset errors can be eliminated in the entire signal chain.

The following table indicates the PSoC devices, PSoC Creator versions, compilers, and development kits that will work with this application note project:

Project
Device
PSoC Creator
Version
Development Kit
CY8CKIT-xxx
Compiler
Architecture
Silicon
Revision
V2.1 SP1
or higher
V2.1/2.0
001
DVK
030/050
DVK
003/014
FTK
Keil
GCC
RVDS
MDK

AN68403.zip

Prod
YES
NO
YES
YES*
NO
YES
N/A
N/A
N/A
Prod
YES
NO
YES
YES*
NO
N/A
YES
YES
YES
AN68403_Archive.zip
ES2, ES3, Prod
NO
YES
YES
YES*
NO
YES
N/A
N/A
N/A
ES1, Prod
NO
YES
YES
YES*
NO
N/A
YES
YES
YES

*Refer to Migrating CY8CKIT-001 DVK project to CY8CKIT 030/ 050

Note:
  1. For PSoC 5 project and related document, please download file AN68403_Archive.zip.

Projects associated with this application note can be downloaded from the ‘Related Files’ section below. For your convenience, we have provided projects that are compatible with the two most recent versions of PSoC Creator:

  • AN68403.zip is used with PSoC Creator 2.1 SP1
  • AN68403_Archive.zip is used with PSoC Creator 2.1/2.0

The project’s default settings may not be compatible with your device or kit, and you may need to change your project settings. For more information, see: