You are here

FSS MB9BF618 EV-Board User Manual | Cypress Semiconductor

FSS MB9BF618 EV-Board User Manual

Last Updated: 
Jun 20, 2016
This is an Obsolete Application Note
The document FSS MB9BF618 EV-Board User Manual has been marked as obsolete. The obsolete version of this application note is still available with the below description but may not be complete or valid any longer. If you have any questions or require support in regards to the below application note content, please click here and create a technical support case.
FSS MB9BF618S Evaluation Board (PN: FSSDC-9B618-EVB, shown as below) provides an economical and simple means for the study of MB9BF610 series MCU (ARM cortex-M3 based). The board contains dual Ethernet ports and some external resources (LED, Key, USB Device, USB Host interface, NAND Flash and Micro SD) to demonstrate MCU periphery function. It also provides standard 20 pin JTAG interface, which is compatible with both IAR and Keil debug tool. In addition, it allows on-board programming using USB mode.

This content contains information on Cypress products that have been migrated from Spansion's website in conjunction with our merger. Although marked with the name of the company that developed the material (Spansion or Fujitsu), Cypress continues to offer the content to our customers. There is no change to this information as a result of this migration. Future revisions will occur when appropriate, and changes will be noted in the revision history.

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.