You are here

AN67442 - SPI Implementation Using SerialMode-0 Of EZ-USB FX2LP™ | Cypress Semiconductor

AN67442 - SPI Implementation Using SerialMode-0 Of EZ-USB FX2LP™

Last Updated: 
May 29, 2014
Version: 
*B
This is an Obsolete Application Note
The document AN67442 - SPI Implementation Using SerialMode-0 Of EZ-USB FX2LP™ has been marked as obsolete. The obsolete version of this application note is still available with the below description but may not be complete or valid any longer. If you have any questions or require support in regards to the below application note content, please click here and create a technical support case.

This application note describes the implementation of serial peripheral interface (SPI) protocol using the FX2LP UART port in serial mode 0. This demonstration uses FX2LP as the SPI master for transferring data to and from an AT25080A EEPROM device. The example code includes functions to the Write/Read byte to and from AT25080A EEPROM.