You are here

AN5047C - Migrating from CY7C68300A to CY7C68300C | Cypress Semiconductor

AN5047C - Migrating from CY7C68300A to CY7C68300C

Last Updated: 
Nov 20, 2015
Version: 
*B
This is an Obsolete Application Note
The document AN5047C - Migrating from CY7C68300A to CY7C68300C has been marked as obsolete. The obsolete version of this application note is still available with the below description but may not be complete or valid any longer. If you have any questions or require support in regards to the below application note content, please click here and create a technical support case.

This application note describes the process of migrating existing designs that use the CY7C68300A (AT2TM) to the CY7C68300C (AT2LP). AT2LP is Cypress’s next-generation high speed USB to ATA/ATAPI bridge. The AT2LP enhances the functionality of the AT2 and minimizes the effect on existing designs that migrate to the AT2LP. The AT2LP’s backward compatibility mode enables it to be used as a pin-for-pin replacement for the AT2, with no EEPROM or board layout changes.