You are here

AN205258 - F2MC-8FX Family, MB951XX, SOFTUNE Workbench Monitor Debugger for 8FX | Cypress Semiconductor

AN205258 - F2MC-8FX Family, MB951XX, SOFTUNE Workbench Monitor Debugger for 8FX

Last Updated: 
Feb 15, 2017
Version: 
*B
This is an Obsolete Application Note
The document AN205258 - F2MC-8FX Family, MB951XX, SOFTUNE Workbench Monitor Debugger for 8FX has been marked as obsolete. The obsolete version of this application note is still available with the below description but may not be complete or valid any longer. If you have any questions or require support in regards to the below application note content, please click here and create a technical support case.

This application note describes the Softune Workbench Monitor Debugger for the 8FX family. The Softune Workbench Monitor Debugger gives the possibility to control the program execution and view internal registers and memory areas directly on a Flash chip built in a target application or starterkit. Therefore a monitor kernel has to be included in the software project flashed to the target system which provides debugging functions via communication with a host computer. 

As there is no MCU board with evaluation chip MB95FV100D-101/103 needed, it is a quite cheap solution for debugging.