You are here

IO-Warrior56-DG USB to SPI and I2C Dongle - From Code Mercenaries | Cypress Semiconductor

IO-Warrior56-DG USB to SPI and I2C Dongle - From Code Mercenaries

Last Updated: 
Jun 13, 2012

Code Mercenaries GmbH
Karl-Marx-Str. 147A
12529 Schoenefeld
Germany
 

  Features  
 
  • I2C-Master at 50, 100, or 400 kHz
  • SPI Master with up to 12 Mhz
  • Througput up to 60 kByte/s
  • 5 V and 3.3 V for external circuit available
  • Internal 5 V pull up resistors can be switched off
  • Clock stretching handshake and multi master on I2C supported
  • Uses standard system drivers
  • Standard conforming USB plug size, no lost ports
  • Single unit in blister pack, bulk packaging optional
  • OEM versions possible
  • Chip level product available
     
 
     

  Description  
 

 The IO-Warrior56 based dongle offers a simple and easy to use solution to connect SPI and I2C devices via a USB port. Connecting sensors, service interfaces, test and evaluation circuits and a lot more applications can be easily answered with the IOW56-DG SPI and I2C dongle. In addition to clock, data and ground also 5 V and 3.3 V are available to power small external devices such as sensors. The dongle ships with a ten wire cable that can be soldered to the PCB as required for the specific application. OEM versions, including customized cabling, are possible. 

Technical Data

  • I2C-Master at 50, 100, or 400 kHz
  • SPI Master with up to 12 MHz
  • Based on IO-Warrior56
  • Throughput up to 60 kByte/s
  • 3.3 V voltage regulator on board
  • 5 V and 3.3 V for external circuit available
  • Internal 5 V pull up resistors can be switched off
  • Clock stretching handshake on I2C supported
  • Uses standard system drivers
  • Compatible with IO-Warrior tools and software
  • Standard USB plug size, no lost ports
  • Single unit in blister pack, bulk packaging optional
  • OEM versions possible
 
     

  PSoC value  
  The Cypress PSoC chip used in the IOW56-DG allows to build this device with a minimal number of external components. The programmable blocks of the PSoC support a high performance.  
     
  Related Resources  
 
Product brochure
Product Datasheet
More information
Technical Support

Phone:
+49-3379-20509-20
Email: support

Contact Partner:
Guido Körber

Address:
Karl-Marx-Str. 147A, 12529 Schoenefeld, Germany.
Ph:
+49-3379-20509-20
Email: Guido Körber
Webpage: www.codemercs.com

Buy Now
Software: PSoC Creator
 
     
 

 

 

  Related Files  
File Title
Quick Start Guide
User Guide
Related Software
Example Projects