You are here

Huanor U3CAMEN USB 3.0 Industrial Camera Development Kit | Cypress Semiconductor

Huanor U3CAMEN USB 3.0 Industrial Camera Development Kit

Last Updated: 
Apr 25, 2013

 
Beijing Huanor-Mingke Electronic Tech Center
BF-198, Zhonghaiyuan Electronic Mall,
No.28-1 Zhongguancun Street,
Haidian District,
Beijing, P.R.C.
  Features  
 
  • SuperSpeed, stable, 5MP real-time video streaming with multiple resolution and frame rate support
    • 15 fps at 5MP resolution
    • 1920x1080@30fps
    • 1280x720@60fps
    • 800x600@90fps
    • VGA@120fps
  • Complete camera reference design: High-performance CMOS Image Sensor (Aptina MT9P006), Altera FPGA (EP3C40F484C8N), standard C Mount lens, VC, FX3 firmware, FPGA HDL, all with source codes.
  • Multiple image processing examples: change resolution and frame rate, image mirror, brightness, contrast, exposure, RGB gain adjustment.
  • Two DDR2 (1Gbits x 2), separate address, data and control bus. Support of Ping Pong transmission. The DDR2 can operate stably at 200MHz.
  • Large cache, use DDR2 as FIFO, ideal for data acquisition. The DDR2 controller does not use NIOS II, resulting in higher data transfer speeds.
 
     

  Description  
 

 


 

U3CAMEN USB 3.0 Industrial Camera Development Kit provides complete hardware and software solutions for accelerating the FPGA HDL, FX3 firmware and device driver development for 5MP USB 3.0 industrial camera. The development kit is suitable for USB 3.0 industrial cameras rapidly develop, performance evaluation, algorithm testing and CMOS Sensor testing applications.

Cypress’s EZ-USB® FX3™ is the world’s first general purpose USB 3.0 peripheral controller. Huanor uses FX3 to complete the SuperSpeed transmission between the DVK and PC. The image sensor is Aptina's high performance CMOS image sensor MT9P006. The data, address and control bus of two DDR2 SDRAMs are completely independent. The FPGA EP3C40F484 plus two DDR2 SDRAMs can implement complex image processing and SuperSpeed data transmission. The U3CAMEN USB 3.0 Industrial Camera Development Kit has up to 310 Mbytes per second data transfer rate. It is ideal for SuperSpeed and large-resolution video image transmission development.

From the block diagram, the FPGA is the main controller of the development board. The FPGA with powerful parallel processing capability can be used to complete the image data acquisition, processing, use DDR2 as data cache and send data to FX3. FX3 upload data to the PC is automatic in the DVK.

 
     

  Value  
 

Cypress FX3 provides a quick and easy solution to add USB 3.0 functionality in industrial cameras. With its highly configurable General Programmable Interface (GPIF II), FX3 connects seamlessly to the Altera FPGA, HD image sensor, and streams HD video content uncompressed over USB 3.0.

 
     
 
Related Resources
 
 

Documentation

Technical Support

Email: support@obeero.com

Webpage: www.huanor.net

 
Contact Partner

Li Jinzhi

Address:
BF-198, Zhonghaiyuan Electronic Mall,
No.28-1 Zhongguancun Street,
Haidian District,
Beijing, P.R.C
Phone:
(86)18618190718
Email:
Webpage:
Buy Now: click here