Introduction
Bootloading is a process that allows you to upgrade your system firmware over a standard communication interface such as USB, I2C, UART or SPI. A bootloader communicates with a host to get new application code or data, and writes it into the device's flash memory.
This application note describes a SPI based bootloader for PSoC 3 and PSoC 5LP. To get introduced to basics of PSoC 3 and PSoC 5LP Bootloader please refer AN73854 - PSoC® 3 and PSoC 5LP - Introduction to Bootloaders. If you intend to learn how to develop USB and I2C Bootloader for PSoC 3 and PSoC 5LP, AN73503 - USB HID Bootloader for PSoC® 3 and PSoC 5LP and AN60317 – PSoC 3 and PSoC 5LP I2C Bootloader respectively should get you going.
The following table indicates the PSoC devices, PSoC Creator versions, compilers, and development kits that will work with this application note project:
Project |
Device
|
|
Development Kit
CY8CKIT-xxx
|
Compiler
|
|
Architecture
|
Silicon
Revision
|
V2.2
|
V2.1 SP1
|
|
|
|
Keil
|
GCC
|
RVDS
|
MDK
|
|
AN84401.zip
|
|
Prod
|
YES
|
NO
|
YES*
|
YES
|
NO
|
YES
|
N/A
|
N/A
|
N/A
|
|
|
Prod
|
YES
|
NO
|
YES*
|
YES
|
NO
|
N/A
|
YES
|
YES
|
YES
|
*Refer to Migrating CY8CKIT-001 DVK project to CY8CKIT 030/ 050.
Notes:
-
Click on AN84741 - PSoC® 5 to PSoC 5LP Migration Guide to learn differences between PSoC 5 and PSoC 5LP.
Projects associated with this application note can be downloaded from the 'Related Files' section below.
|