Cypress Perform

Home > Documentation > Code Examples
CE85395 - SMBus Slave using PSoC® 1

Last Updated: 03/22/2013
Version: **
This project demonstrates how to implement a SMBus Slave device using PSoC® 1, and explains different SMBus commands and their usage with the Bridge Control Panel (BCP) tool.

Overview

The SMBusSlave user module (UM) is a digital communication user module similar to I2C Slave. At the physical layer, multiple devices, both masters and slaves, will be connected to the same bus. The SMBus Slave UM in PSoC 1 uses I2C Controller as its physical layer and firmware-based data link layer. This code example discusses how to use the SMBus Slave user module and its commands to communicate to a host SMBus device.

这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。

これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。 最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。




Related Files


Spec No: 001-85395; Sunset Owner: KERI; Secondary Owner: RICA; Sunset Date: 08/19/13
Rate Code Example

Related Pages

Spec No: 001-85395; Sunset Owner: KERI; Secondary Owner: RICA; Sunset Date: 08/19/13