Cypress Perform

Overview of Cypress/TED USB 3.0 Device Interface Board - TB-FMCL-USB30

• FPGA Mezzanine Card (FMC) designed for FPGA Development
• USB 3.0 interface card enables USB 3.0 to FPGA evaluation platforms supporting FMC
• USB 3.0 interface card consists of:
  • On-board Cypress EZ-USB FX3 (CYUSB3014)
  • USB Type-B connector
  • 128 Mbit Serial NOR Flash Installed
  • Pin header for interface signals and debugging
    • RS-232
    • JTAG
    • I2C
    • I2S
    • SPI

 

Development Board Diagram

The TB-FMCL-USB30 is an FPGA mezzanine card (FMC) that connects with a PC interface card capable of a data rate of up to 5 Gbps. It utilizes the Cypress EZ-USB FX3 device, for the SuperSpeed USB implementation. The TB-FMCL-USB30 enables an embedded USB 3.0 evaluation kit by simply connecting to the motherboard. The accompanying reference design allows access to the slave peripheral supporting AMBA®4 AXI4™ (Advanced eXtensible Interface 4) implemented in a Xilinx FPGA. It lets users easily incorporate a USB 3.0 interface into AXI4-based FPGA designs

The TB-FMCL-USB30 is targeted for a wide variety of embedded applications, requiring USB 3.0 interface. For the motherboards of this interface card, Kintex-7 ACDC1.0 base board and evaluation platform using the Virtex®-6 FPGA and Spartan®-6 FPGA are available from TED as an “inrevium” brand product.

http://solutions.inrevium.com/index.html

 

Startup Guide

User Guide