User Module Datasheet: CapSense® Sigma-Delta Datasheet CSDPLUS V 1.10 (CY8C20xx7/S, CY8C20055)
Last Updated: 10/29/2012
|
|
|
Version: 1.10
|
Features and Overview
-
Immune to GPIO current transient, VDD fluctuation, entry and exit from sleep, and IDAC RTS noise
-
Implements CapSense® capacitive sensing using sigma-delta data conversion
-
Configurable system parameters allow tuning to optimize performance in a range of applications
-
Supports as many as 35 capacitive sensors and six sliders
-
Capable of detecting touches as low as 0.1 pF, meaning that, detecting a finger is possible through up to 15 mm of glass or 5 mm of plastic
-
Supports capacitive sensors configured as independent buttons or as dependent arrays to form sliders, or both
-
Effective number of slider elements can double the number of dedicated I/O pins using diplexing technique
-
Supports slider resolution greater than physical pitch by using interpolation
-
For more, see pdf
The CSDPLUS User Module is based on the differential capacitive sensing method. This user module uses the Analog MUX Bus for connecting a capacitive sensing analog circuitry to any PSoC pin. The CSDPLUS User Module connects the active sensor to the Analog MUX Bus allowing the CapSense circuitry to measure its capacitance and translate that capacitance into a digital code. Firmware serially scans the sensors by sequentially setting corresponding bits in the MUX_CRx registers.
|
这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。
これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。
最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。
Spec No: 001-75357;
Sunset Owner: SMAT;
Secondary Owner: BSKI;
Sunset Date: 10/13/12
|
|