AN65974 - Designing with the EZ-USB® FX3™ Slave FIFO Interface
AN65974 describes the synchronous Slave FIFO interface of EZ-USB FX3. The hardware interface and configuration settings for the FLAGs are described in detail with examples.
AN68829 - Slave FIFO Interface for EZ-USB® FX3™: 5-Bit Address Mode
AN68829 discusses the asynchronous and synchronous Slave FIFO interfaces for the EZ-USB® FX3™ SuperSpeed USB controller. This application note also describes the mode in which the interface supports a 5-bit address bus and lets you access all 32 internal sockets of EZ-USB FX3.
AN70707 - EZ-USB® FX3™/FX3S™ Hardware Design Guidelines and Schematic Checklist
This application note discusses recommended practices for EZ-USB® FX3™/FX3S™ hardware design and the critical items that a developer must consider. The Cypress EZ-USB FX3 is the next generation USB 3.0 peripheral controller. With its highly integrated and flexible features, developers can add USB 3.0 functionality to any system. All recommendations apply to FX3 and FX3S, unless specifically mentioned otherwise.
AN73150 - Booting EZ-USB® FX3 over High-Speed USB
AN75432 - USB 3.0 EZ-USB® FX3™ Orientation
AN75705 - Getting Started with EZ-USB® FX3™
AN75705 gets you started with the Cypress EZ-USB FX3 USB 3.0 device controller. This note highlights key FX3 features and applications while providing signposts along the way to various design resources to help with FX3 development.
AN76348 - Differences in Implementation of EZ-USB® FX2LP™ and EZ-USB FX3 Applications
AN76348 describes the differences between the implementation of applications based on EZ-USB FX2LP™ and EZ-USB FX3™.
AN76405 - EZ-USB® FX3™ Boot Options
This application note describes the boot options - over USB, I2C, SPI, and synchronous Address Data Multiplexed (ADMux) interfaces - available for the Cypress EZ-USB® FX3™ peripheral controller