Cypress Perform

Home > Documentation > Component Datasheets
Resistive Touch (ResistiveTouch) 1.10

Last Updated: 05/02/2013
Version: 1.10
PSoC® Creator™ Component Datasheet

Features

  • Supports 4-wire resistive touchscreen interface
  • Supports the Delta Sigma Converter for both the PSoC 3 and PSoC 5 devices
  • Supports the ADC Successive Approximation Register for PSoC 5 devices
     Symbol Diagram
General Description

This resistive touchscreen component is used to interface with a 4-wire resistive touch screen. The component provides a method to integrate and configure the resistive touch elements of a touchscreen with the emWin Graphics library. It integrates hardware-dependent functions that are called by the touchscreen driver supplied with emWin when polling the touch panel.

Required Software: PSoC Creator 2.0 Component Pack 1 and above.
PSoC® Creator™ emWin and Resistive Touch Components Video
use for camtasia screencasts

这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。

これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。 最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.




Related Files


Spec No: None; Sunset Owner: YFS; Secondary Owner: YFS; Sunset Date: 07/30/12
Rate Component Da..

Related Pages

Spec No: None; Sunset Owner: YFS; Secondary Owner: YFS; Sunset Date: 07/30/12