AN73617 - PSoC® Designer Boot Process, From Reset to Main
Last Updated: 12/11/2012
|
|
|
Version: *A
|
| AN73617 describes the PSoC® Designer initialization process of PSoC 1, from the release of reset to the start of C code execution in main. The application note includes instructions on how to modify the interrupt vector table to execute custom interrupt service routines. |
Introduction
Because PSoC 1 offers billions of configuration options, the PSoC device must be properly initialized after reset to fulfill its potential. The PSoC Designer boot process performs these necessary initialization tasks before entering main to provide an optimal working environment. This application note explains the device initialization procedure, but this document is not required reading for users of PSoC 1 or the PSoC Designer integrated development environment (IDE). The information is for users seeking a deeper understanding of PSoC and PSoC Designer initialization before main is executed.
PSoC® 1 Boot Process from Reset to Main
use for camtasia screencasts
|
这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。
これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。
最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。
Related Application Notes:
Domain Tags: PSoC Resources, Interrupts, Startup
Related Knowledge Base: boot.asm, Interrupt, PSoC Designer, XRES
Spec No: 001-73617;
Sunset Owner: RJVB;
Secondary Owner: GULA;
Sunset Date: 07/23/12
|
|