|
|
Features |
|
|
|
-
I2C-Master at 50, 100, or 400 kHz
-
SPI Master with up to 12 Mhz
-
Througput up to 60 kByte/s
-
5 V and 3.3 V for external circuit available
-
Internal 5 V pull up resistors can be switched off
-
Clock stretching handshake and multi master on I2C supported
-
Uses standard system drivers
-
Standard conforming USB plug size, no lost ports
-
Single unit in blister pack, bulk packaging optional
-
OEM versions possible
-
Chip level product available
|
|
|
|
|
|
|
|
Description |
|
|
|
The IO-Warrior56 based dongle offers a simple and easy to use solution to connect SPI and I2C devices via a USB port. Connecting sensors, service interfaces, test and evaluation circuits and a lot more applications can be easily answered with the IOW56-DG SPI and I2C dongle. In addition to clock, data and ground also 5 V and 3.3 V are available to power small external devices such as sensors. The dongle ships with a ten wire cable that can be soldered to the PCB as required for the specific application. OEM versions, including customized cabling, are possible.
Technical Data
-
I2C-Master at 50, 100, or 400 kHz
-
SPI Master with up to 12 MHz
-
Based on IO-Warrior56
-
Throughput up to 60 kByte/s
-
3.3 V voltage regulator on board
-
5 V and 3.3 V for external circuit available
-
Internal 5 V pull up resistors can be switched off
-
Clock stretching handshake on I2C supported
-
Uses standard system drivers
-
Compatible with IO-Warrior tools and software
-
Standard USB plug size, no lost ports
-
Single unit in blister pack, bulk packaging optional
-
OEM versions possible
|
|
|
|
|
|
|
|
PSoC value |
|
|
|
The Cypress PSoC chip used in the IOW56-DG allows to build this device with a minimal number of external components. The programmable blocks of the PSoC support a high performance. |
|
|
|
|
|
|
|