Cypress Perform

Home > Documentation > Component Datasheets

Segment Display (Seg_Display) 1.20

Last Updated: 05/02/2013
Version: 1.20

PSoC® Creator™ Component Datasheet

Features
Symbol Diagram
  • Available for PSoC 5 devices only (For PSoC 3 and PSoC 5LP devices, use the Segment LCD version 3.10 component)
  • 2 to 768 pixels or symbols
  • 1/3, 1/4, and 1/5 bias supported
  • 10- to 150-Hz refresh rate
  • Integrated bias generation between 2.0 V and 5.2 V with up to 128 digitally controlled bias levels for dynamic contrast control
  • Supports both type A (standard) and type B (low power) waveforms
  • Pixel state of the display may be inverted for negative image
  • 256 bytes of display memory (frame buffer)
  • User-defined pixel or symbol map with optional 7-, 14-, or 16-segment character; 5x7 or 5x8 dot matrix; and bar graph calculation routines


General Description

The Segment Display (Seg_Display) component can directly drive 3.3-V and 5.0-V LCD glass at multiplex ratios up to 16x. This component provides an easy method of configuring the PSoC device to drive your custom or standard glass.

Required Software: PSoC Creator 2.0 and above


这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时,我们强烈建议您参照英文版本。

これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。 最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.




Related Files


Spec No: None; Sunset Owner: RLRM; Secondary Owner: MEH; Sunset Date: 11/15/12

Rate Component Da..

Related Pages

Spec No: None; Sunset Owner: RLRM; Secondary Owner: MEH; Sunset Date: 11/15/12