Cypress Perform

Home > Documentation > Component Datasheets
Operational Amplifier (Opamp) 1.90

Last Updated: 12/25/2012
Version: 1.90
PSoC® Creator™ Component Datasheet

Features

  • Follower or Opamp configuration
  • Unity gain bandwidth > 3.0 MHz
  • Input offset voltage 2.0 mV max
  • Rail-to-rail inputs and output
  • Output direct low resistance connection to pin
  • 25 mA output current
  • Programmable power and bandwidth
  • Internal connection for follower (saves pin)
 Symbol Diagram

General Description

The Opamp component provides a low-voltage, low-power operational amplifier and may be internally connected as a voltage follower. The inputs and output may be connected to internal routing nodes, directly to pins, or a combination of internal and external signals. The Opamp is suitable for interfacing with high-impedance sensors, buffering the output of voltage DACs, driving up to 25 mA; and building active filters in any standard topology.   

Required Software: PSoC Creator v1.0 Beta 5 and above 

这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。

これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。 最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.




Related Files


Spec No: None; Sunset Owner: SEG; Secondary Owner: GDK; Sunset Date: 08/18/11
Rate Component Da..

Related Pages