Cypress Perform

Home > Documentation > Component Datasheets
Pseudo Random Sequence (PRS) 2.30

Last Updated: 04/30/2013
Version: 2.30
PSoC® Creator™ Component Datasheet

Features

  • 2 to 64 bits PRS sequence length
  • Time Division Multiplexing mode
  • Serial output bit stream
  • Continuous or single-step run modes
  • Standard or custom polynomial
  • Standard or custom seed value
  • Enable input provides synchronized operation with other components
  • Computed pseudo random number can be read directly from the Linear Feedback Shift Register (LFSR)
 Symbol Diagram

General Description

The Pseudo Random Sequence (PRS) component uses an LFSR to generate a pseudo random sequence, which outputs a pseudo random bit stream. The LFSR is of the Galois form (sometimes known as the modular form) and uses the provided maximal code length, or period. The PRS component runs continuously after starting as long as the Enable Input is held high. The PRS number generator can be started with any valid seed value other than 0.

Required Software: PSoC Creator v2.0 and above

这些文档仅供参考。赛普拉斯、赛普拉斯管理层、雇员及分销商对翻译错误不承担任何责任。当您在设计开发过程中使用这些文档时，我们强烈建议您参照英文版本。

これらの文献はあくまでもご参考のためのみに日本語翻訳されています。誤訳によるトラブルが発生した場合、Cypress Semiconductor Corp. 全ての子会社、関連会社、役員、従業員、販売代理店は一切の責任を負いかねます。 最新の英語版オリジナル文献を必ずご参照いただくことをお勧め致します。

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.




Related Files


Spec No: 001-86303; Sunset Owner: YFS; Secondary Owner: POA; Sunset Date: 10/20/11
Rate Component Da..

Related Pages

Spec No: 001-86303; Sunset Owner: YFS; Secondary Owner: POA; Sunset Date: 10/20/11